• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Rear Spring Question

green71

Jr. Member
Joined
Feb 9, 2010
Messages
51
I had just finished installing new stock rear springs on my 71 when I read in the Ford Truck Manual that a spacer is located between the spring and the axle to obtain a level ride. I didn't see such a spacer. What is the down side of not using this spacer?
The
 

DirtDonk

Contributor
Bronco Guru
Joined
Nov 3, 2003
Messages
51,651
Never seen a spacer on a '71. In fact, I can't say I've ever seen a spacer on any year model EB that I can remember.
So at face value, I'd say there's no downside. However, if yours sits lower in the rear than you like, you can add one of the proper thickness to compensate for that.

Is yours a Ford book, or other? Does it cover just Early Broncos, or pickups as well? Most pickups and full-size Broncos did in fact come with some sort of spacer from the factory.
I've seen from 1.5" to over 4" blocks depending on the truck. But never seen one on an EB.

Paul
 
OP
OP
G

green71

Jr. Member
Joined
Feb 9, 2010
Messages
51
Yes it is a 1971 Ford Truck Manual. It has the Broncos, Econolines, pickups and larger trucks also. The reference to the spacer is on page 14-30-01. Thanks for the info.
 
Top