With my old springs, the rear left leaned about 1.5 inches when looking at it from the rear. The front is only off 1/4 inch. My neighbor and I both bought new suspensions (dever springs/ BC coils) this last month. We did mine first, and after a day it was leaning again in the rear and only a 1/8 inch differnce in the front..
So I tore the rear down and put his rear spings on and the rear left still sags.
I put the rear part of the frame on jack stands so both leafs/axle was suspeneded, and the measurement from the bumper to the ground is the same on both sides (so I'm assuming the frame isn't bent) I was carefull when I did the C bushings so I don't think it caused by the front
Any thoughs? thanks
So I tore the rear down and put his rear spings on and the rear left still sags.
I put the rear part of the frame on jack stands so both leafs/axle was suspeneded, and the measurement from the bumper to the ground is the same on both sides (so I'm assuming the frame isn't bent) I was carefull when I did the C bushings so I don't think it caused by the front
Any thoughs? thanks