• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Recommendation for leaf springs

johnbeck

Sr. Member
Joined
Aug 11, 2015
Messages
534
I'm considering replacing the 46 year old 5+ overload leaf springs with "progressive" probably medium duty springs. 80 to 90 percent driver only, 10 + per cent one to four people. 90 + per cent on paved roads. I don't want a sloppy, mushy ride, but getting beat up on city streets isn't fun any more. Any suggestion? Progressive spring you wish you hadn't bought? Springs that have met your every wish? Thanks
 

SteveL

Huge chevy guy
Joined
Jun 24, 2001
Messages
11,969
Loc.
Hawthorne ca
For the rear get an 11 pack from one of the vendors. While you're at it may as well get matching coils. For mostly street probably want progressive rate coils. Shipping can be steep on springs so grab em from a vendor near you. Check out the wh kit with bilstiens.
 

ppetersjr68

New Member
Joined
Mar 29, 2016
Messages
24
Loc.
Houston, TX
I will be following this as I am also interested in replacing my stock springs.
From what I've read on here, 10-11pack leaf springs are the way to go.
I did notice bcbroncos no longer list leaf springs on their site.
I emailed them with no response. Anyone know if they're still available?
 

SteveL

Huge chevy guy
Joined
Jun 24, 2001
Messages
11,969
Loc.
Hawthorne ca
At some point I think bc switched to 9 packs. I think it might be in line with what cage was doing. Not sure why they aren't listed. I have their 11 packs along with their coils up front
Very happy with em.
 

trailpsycho

Bronco Guru
Joined
Dec 11, 2003
Messages
4,856
Deaver Leafs and coils. Jeff's used to carry Deaver. Several other vendors probably do as well.
 

bknbronco

Bronco Guru
Joined
Jan 17, 2011
Messages
4,388
Loc.
North Metro, MN
i got 5.5 inch deaver coils from JBG. I also paired them with JBG 5.5 inch leaf springs. It starts out a tad stiff in the rear but after a few thousand miles it softened up a tad. Its still stiff but i think any leaf with the arch of a bronco with 5.5" lift will be a tad stiff. Just take the rear shocks out
 

Bronco4x4

Sr. Member
Joined
Dec 21, 2009
Messages
621
My 69 EB has Deaver 11 packs I bought used (low miles). They are 2.5" lift and have settled <.25 ". They give a good ride with Duff coils in front. This EB has a soft top, & stock bumpers. My current 71 EB build has 2.5" Duff rear 11 packs that are Deaver (bought approx. 8 mos. ago). I was able to order as heavy duty since this vehicle will have a Hanson rear bumper with tire carrier/cooler rack and a hardtop. Make sure you figure out the rear loading of your EB because you will get some settling of the springs over time. AL
 

trailpsycho

Bronco Guru
Joined
Dec 11, 2003
Messages
4,856
I went to Deavers website, doesn't look like they have anything for the EB anymore. They only go back to the 1980 Bronco.

Its not like the Bronco suppliers are making these springs themselves. They are custom ordered, made by Deaver... JBG is one place to find them. There may be other Bronco parts houses that source them as well. Good luck.
 
OP
OP
J

johnbeck

Sr. Member
Joined
Aug 11, 2015
Messages
534
I bought Wildhorses 10pack stock lift leaf springs. If you buy it, likely other manufacturers, You'll have to drill out the spring perch to 5/8th inch(don't drill into and thru the differential housing), and drill out 3/4"plus the U bolt top plate center hole for the springs nut(If your using the original U bolt plate).
 

jmangi62

Bronco Guru
Joined
Jul 28, 2013
Messages
2,512
I would have to second the WH with bilsteins. Should get a Good ride out of that combo,street and off road with no problems. ;)
 
Top