• Just a reminder that you won't be able to start new posts or reply to existings posts in the Archive forum.

    This is where all the old posts go so they can still be used for reference and searched.
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Remote Mount Tranny Cooler Mounting Help

mountainview68

Sr. Member
Joined
Sep 5, 2004
Messages
598
Loc.
yet to be determined
I bought a Derale stacked plate tranny cooler with a cooling fan attached to it. It would fit perfectly on the passenger side fender well, but I am concerned about the heat in the engine compartment. What do the think??? Any advice would be great.
 

74bob

Full Member
Joined
Jun 1, 2003
Messages
229
Loc.
Broomfield,CO
I just put mine on the drivers fenderwell. I don't see a problem mounting where you are thinking. With the fan going it gets plenty of air. I also raised mine another inch via some nylon spacers I got at Home Depot. Had to do this so the lines would clear the windshield washer res.

The reason I mounted mine on the drivers side is because I have my ARB compressor, module for ignition, RS9000 air block and remote transmission filter on the passenger side.
 

ROKDWLR

Bronco Guru
Joined
Dec 3, 2003
Messages
1,016
Loc.
Stockton, Ca.
I have ceramic headers and plan to get a cowl hood but still don't want mine in the engine bay. I'm getting the same Derale cooler but it's going under the passenger seat floorboard like a few other members and I'll fab up a vented skid plate to protect it from the rocks.
 

73stallion

Bronco Guru
Joined
Mar 5, 2004
Messages
16,786
Loc.
Eugene, OR
i've installed 2 of them under the bed in front of the rear tank crossmember between the frame rails. both seem to cool just fine.
 

daddyo

Full Member
Joined
Aug 9, 2003
Messages
262
Loc.
Southern California
I mounted my Derale cooler on the inner fender well and that has worked
out well. I don't have a tranny temperature gauge, but I my tranny has
not puked fluid and the fluid still smells good.

Andrew
 

MsMyMny

Full Member
Joined
Jan 24, 2002
Messages
200
Loc.
So Cal
Mine is mounted on the passenger side fender, I cut a hole in the fender and have it baffled to keep "STUFF" out and still have GREAT air flow. Check out the photos. Spent last weekend playing in the mud and the baffle did it's job.
Scott
 

Attachments

  • TCParts.JPG
    TCParts.JPG
    182.2 KB · Views: 60
  • Trns coolerLayoutr.JPG
    Trns coolerLayoutr.JPG
    132.8 KB · Views: 55
  • Trans cooler CutOut.JPG
    Trans cooler CutOut.JPG
    92.3 KB · Views: 68
  • Trans Cooler CutOut1.JPG
    Trans Cooler CutOut1.JPG
    100.4 KB · Views: 53
  • Top View Baffel.JPG
    Top View Baffel.JPG
    79.2 KB · Views: 54
  • Bottom View Baffle.JPG
    Bottom View Baffle.JPG
    151.3 KB · Views: 65
  • Bottom View2.JPG
    Bottom View2.JPG
    99.5 KB · Views: 72
  • Final Instal.JPG
    Final Instal.JPG
    130.6 KB · Views: 90

joser

Sr. Member
Joined
Aug 9, 2003
Messages
698
Loc.
Chesterfield, MI
Awesome idea and very clean job. I am just about to mount a tranny cooler and will be doing something very similar.
 

HotWheels

Bronco Guru
Joined
Jul 8, 2003
Messages
9,179
Loc.
Twilight Zone
hahaha...you beat me to the baffle (haven't had time let). But mine is there also w/o issue.
 

Attachments

  • Engine Now.jpg
    Engine Now.jpg
    50.3 KB · Views: 78

bannind

Sr. Member
Joined
Mar 24, 2005
Messages
612
Hotwheels -

Looking at your picture, do you have your tranny fluid running through both the aux system and through the radiator?

thanks,
dan
 

HotWheels

Bronco Guru
Joined
Jul 8, 2003
Messages
9,179
Loc.
Twilight Zone
bannind said:
Hotwheels -

Looking at your picture, do you have your tranny fluid running through both the aux system and through the radiator?

thanks,
dan

yes...it is in the return line. Rad helps the tranny warm up and the fan maintains the right temp.

:)

Mick
 

MsMyMny

Full Member
Joined
Jan 24, 2002
Messages
200
Loc.
So Cal
HotWheels said:
hahaha...you beat me to the baffle (haven't had time let). But mine is there also w/o issue.
That engine bay is "WAY" to clean. It must be a "before" picture ;D
Scott
 
Top