Just a reminder that you won't be able to start new posts or reply to existings posts in the Archive forum.
This is where all the old posts go so they can still be used for reference and searched.
Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
If you have problems registering or can't log into your account, please contact Admin.
The good ones do...I've run into some smaller PC shops (really just guys with tools & a garage) that don't have the equipment to blast or clean parts. They might be cheaper on the coating, but it's up to the customer to make sure everything's clean & ready. Check with whomever is going to do the coating to be sure.