Returning bumper to stock

[BGBronco]

The PO fabricated a custom bumper that I am returning to stock. Bumper has been ordered but not here yet. I've searched but not been able to figure out if I need a different mount / mounting bracket to fit the stock bumper to the frame. Here are a few pictures of what the current set up looks like. Thank you.

 

[Teal68]

As long as your frame horns are still there it should bolt right on.

 

[BGBronco]

can you tell from the second picture? Thank you

 

[surfer-b]

The driver side frame horn is still there, cant see the pass side but I would guess that it is, from the pic it looks as though you got lucky and its just bolted on and not welded. just looked at the first pic, it looks like both are still there

 

[Teal68]

If the bottom is just bolted on like the top is then you should be fine.

 

[BGBronco]

Thank you!

 

[Steve83]

This shows what the stock frame looks like, for stock bumper mounting:



There are no stock bumper brackets - the bumper bolts directly to the frame horns.