- Joined
- Oct 11, 2007
- Messages
- 564
hey guys i instaled a new set of lifters on my bronco. was tightning up the rocker arm nuts and one of them had bad threads i guess because the threads stripped before i even torqued them. so my question is does anyone know what thread size those studs are because a 9/16 wrench fits the nut but the threads are not 3/8 or 5/16 as ive tried die nuts for both of those sizes. how hard is it to pull the stud out and install a screw in type if I cant fix the threads? my bronco is a 77 but if i remember right the motor is a reman 79 302











