• Just a reminder that you won't be able to start new posts or reply to existings posts in the Archive forum.

    This is where all the old posts go so they can still be used for reference and searched.
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Rocker Guard Pics ?

matt w

Bronco Guru
Joined
Jun 12, 2007
Messages
2,799
Got any pics of Rocker Guards on your Bronco?

Can you post em & tell me the Mfg.?

I am in the market & ran them on "another" nameless 4X!
Thanks for the help and input!;D
 

Ohio Bronco 21

Bronco Guru
Joined
Dec 5, 2006
Messages
4,194
Loc.
Cleveland
American Bronco makes this style. Wraps around the whole rocker.
 

Attachments

  • hanson3.jpg
    hanson3.jpg
    91.3 KB · Views: 273
  • top on66.jpg
    top on66.jpg
    188 KB · Views: 273

ghost66

Bronco Guru
Joined
Jan 19, 2005
Messages
2,321
These are from WCB they look similar to American Bronco rocker covers
 
Last edited:

SC74

Contributor
Bronco Guru
Joined
May 24, 2004
Messages
3,472
These are the BC 1/4" rocker guards. The installed pic isn't the best to show the rocker guard, but I've got it line-x'd to match the tub. They're definitley stout and have taken a beating.

If you going to have more of a trail rig though I recommend cutting the rockers off and going back with a 2x4 or similar rectangle steel to gain some clearance also.
 

Attachments

  • IMG_2084.JPG
    IMG_2084.JPG
    116.1 KB · Views: 306
  • IMG_2082.JPG
    IMG_2082.JPG
    95.9 KB · Views: 234
  • Suspension Junction 3.jpg
    Suspension Junction 3.jpg
    150.3 KB · Views: 222

johnmlebel

Bronco Guru
Joined
Jun 17, 2007
Messages
1,369
i got mine for m last 2 trucks from a guy on ebay ant0940 or something like that and they work and look great
 

JWMcCrary

Contributor
Bronco Guru
Joined
Oct 14, 2004
Messages
5,001

Attachments

  • Pre-Run 028.jpg
    Pre-Run 028.jpg
    180.1 KB · Views: 279

lobobronco

Full Member
Joined
Feb 2, 2008
Messages
174
Here are mine...James Duff 1/4". I am very pleased with them!
 

Attachments

  • pic 2.jpg
    pic 2.jpg
    132 KB · Views: 234

KyleQ

Bronco Guru
Joined
Apr 24, 2008
Messages
5,480
Anyone have a link on how to cut off the rockers and weld some 2x4 tube there?
 

bigbadktm

Full Member
Joined
Jul 22, 2007
Messages
291
Loc.
East CountySan Diego
how does the 2x4 attach? to teh frame? thats a long distance if so, I am looking to build my own, then I looked at the distance between the 2 and kinda gave up. any help would be appreciated.
 

broncokak

Bronco Guru
Joined
Jun 13, 2006
Messages
3,970
Polished stainless steel!!! Completely removed the old rocker and built these to bolt in place of them.
 

Attachments

  • Todd's Bronco 006.jpg
    Todd's Bronco 006.jpg
    118 KB · Views: 257
  • Todd's Bronco 007.jpg
    Todd's Bronco 007.jpg
    155.2 KB · Views: 206

Chief Master Sergeant

Retired U.S. Air Force
Joined
Nov 6, 2002
Messages
5,222
I tied mine into the front door posts, which I had to cut the bottom off of anyway to repair rust. I then laid weld on both the outside edge and left a small portion of the inner rocker to weld the backside to it. I would like to tie them into the frame someday, but they work for now and are pretty strong. In the second picture you can see where I left the inner rocker in place until I finished the welding. Afterwards I cut it off flush.
 

Attachments

  • Done2.JPG
    Done2.JPG
    100.1 KB · Views: 196
  • DSCN2210.JPG
    DSCN2210.JPG
    109.3 KB · Views: 224

Kenny

Full Member
Joined
Jul 26, 2002
Messages
301
Anyone have a link on how to cut off the rockers and weld some 2x4 tube there?

Bronco Driver Magazine Issue #30 (page 65) has a good article on welding a a piece of 2 X 4 steel to the frame. Maybe someone has a scanner?
 

KyleQ

Bronco Guru
Joined
Apr 24, 2008
Messages
5,480
Bronco Driver Magazine Issue #30 (page 65) has a good article on welding a a piece of 2 X 4 steel to the frame. Maybe someone has a scanner?

That would be very nice - I don't think I have been getting them long enough to have that article..
 

SC74

Contributor
Bronco Guru
Joined
May 24, 2004
Messages
3,472
That would be very nice - I don't think I have been getting them long enough to have that article..

Check out my build thread (link in my sig) and see all the pictures of when I did it. I had my tub upside down when I did it so it was a lot easier, but I got some good pics.
 
OP
OP
matt w

matt w

Bronco Guru
Joined
Jun 12, 2007
Messages
2,799
PA-PAA--PING! ;D

Can anyone add to this!?:cool:

...Gonna be my next mod! ;D
 
OP
OP
matt w

matt w

Bronco Guru
Joined
Jun 12, 2007
Messages
2,799
I like those Duff guards but shipping to the west coast would be pricey, I wonder if Toms are the same thing?

...Yep I have had my eye on Tom's and got a quote from Kelly (an awesome custy service guy! btw ) a week or so ago. Still price-eee;D ..darn!;D
 

Devin

Bronco Kineticist
Joined
Apr 29, 2004
Messages
3,956
Here are mine. 2X6 steel tubing welded to the body after the rockers were removed.
 

Attachments

  • IMG_0954.JPG
    IMG_0954.JPG
    188.2 KB · Views: 167
Top