• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Roll Bar Issues

Tedster100

Chairman of the Bored
Joined
Aug 25, 2010
Messages
1,762
Need some advice, measurements, ideas... I bought a 6 point family cage several years ago while collecting parts for my build and it's pretty much fabricated and tack welded together. My problem is that no matter how I mount the fold & tumble the rear bar is right at my head where even a little bump is going to make a lump.

My rear bar is angled in a lot and I'm finally at the point where I have to admit that the best solution seems to be to put a different hoop in the rear that is more straight up & down and not angled to the front so much.

That leaves me with the following questions:
1. What is the distance that the back of the rear hoop has to be from the inside of the tailgate to not cause problems with the new best top I will be installing? (offset distance)
2. What is the cheapest place to get a single hoop and a couple of straight pieces of 2"?

Any help would be much appreciated.
Thanks.
 
OP
OP
Tedster100

Tedster100

Chairman of the Bored
Joined
Aug 25, 2010
Messages
1,762
Here is a picture of what the cage looks like, not my rig but the exact cage I have built from their kit.
 

Attachments

  • Roll bar.jpeg
    Roll bar.jpeg
    15.6 KB · Views: 96

airbur

Bronco Guru
Joined
Jun 3, 2008
Messages
2,763
Loc.
Castle Pines, CO
You'll probably get more expert opinions later, but I would suggest cutting and extending the over-head bars a bit to lessen the angle of the rear bars....effectively pushing that head-bumper back behind your head. Sounds like that's your plan anyway. I'm not sure but you might try contacting Mike at ProtoFab (www.protofab4x4.com) and see what he would sell you that rear hoop for. Here's a shot of mine...you can see it doesn't have quite the angle yours does....
 

Attachments

  • CIMG6298.jpg
    CIMG6298.jpg
    63 KB · Views: 50
OP
OP
Tedster100

Tedster100

Chairman of the Bored
Joined
Aug 25, 2010
Messages
1,762
Airbur - nice looking rig. I think that's what I'll end up doing. I may get my windshield mounted and install the soft top so I know exactly how far I can go. Have to do it sometime, I was trying to keep it last but it may be better to be sure.

Thanks.
 
Top