• Just a reminder that you won't be able to start new posts or reply to existings posts in the Archive forum.

    This is where all the old posts go so they can still be used for reference and searched.
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Roll cage advice

PaulN

Jr. Member
Joined
Oct 5, 2013
Messages
135
Im looking to get a full family roll cage and im looking at the Tom's Bronco Parts full family roll cage for $499. I would like to know if anyone has any experience on this cage and if they like it or not. Also compared to other full family roll cages is the toms cage a good quality cage? Also did most of you powder coat your cage or just paint...a little confused on what I should do. Im new and could use some help! Thank you!

Paul
 

Bukin 67

Bronco Abuser
Joined
Jul 3, 2008
Messages
2,268
I believe I got my first EB family cage at TBP about 12 or 13 years ago. It came with the rear section complete and needed the front bar connected with the 2 side bars. The quality was very good, however I never was unfortunate enough to test it. You can bolt it to the body, or they also sell the frame tie-ins.

I primed and painted mine with a paint that has become a favorite of mine to use - Rustoleum hammered in the rattle can. My Bronco is always garaged so weather or rust was never a concern which is why I didn't powder coat.
 

bronconut73

Bronco Guru
Joined
Aug 7, 2012
Messages
9,919
I have the JBG Overhaulin' Cage.
Perfect for me.
I used flat black paint to make future touch up easy.
 

lowbush

Bronco Guru
Joined
Sep 13, 2010
Messages
1,807
Loc.
Summerland Key, FL
My vote is powder coat. It's durable and contrary to popular belief it can be touched up with paint or powdercoat and a heat gun.
 

Crush

Contributor
Bronco Guru
Joined
May 30, 2007
Messages
3,463
Loc.
Greenbottom, WV
I used the kentrol sport cage. they also had a family cage that looked just like it but a little longer the sport cage does provide a little protection for the back seat though. However, I do not know if they still make them. I really liked the style of it but I did however modify a couple of small things just to suit my original idea of how a cage should look. But it was the closest I could find. I also painted with a rattle can and the people who have seen it really love it. I know....PICS... I really need to pay my 12 bucks. lol
 

Glass Pony

Contributor
Bronco Guru
Joined
Feb 13, 2012
Messages
1,954
Loc.
Sussex County Delaware
I vote for powder coat also.
Hard to beat the price of rattle cans but if you are going to have it painted by a body shop the powder coat would probably be about the same price.
 

Attachments

  • IMG_0566.jpg
    IMG_0566.jpg
    92 KB · Views: 161

Blue Bastard

Bronco Guru
Joined
May 14, 2012
Messages
2,161
I just finished my cage last weekend.



http://www.broncobob.com/



I did the pre fit option along with the "big man" option. It came to like 700 shipped to me in michigan. the pre fit was good and only required modification on the main hoop when fitting the front section.



I also looked at the powder cost. i was quoted 325. I opted for The hammered finish rattle can myself.
7y9abydu.jpg
juny4a7e.jpg
 

Vin218

Sr. Member
Joined
Apr 3, 2012
Messages
435
Loc.
Manchester, NH
I've been looking at the extreme custom fab cage on ebay, might be another option for you to look at.

I would powder coat if you have the funds but as others have showed rattle can looks good too.
 

aguida

New Member
Joined
Mar 26, 2014
Messages
12
Loc.
Virginia Beach
I just received my cage from Gordon at bailie bilt. He was awesome to work with and I ended up grabbing a new front bumper also. I'm in the process of priming and painting right now, rattle can self etching primer and rustoleum black. It looks good so far.
 

Crush

Contributor
Bronco Guru
Joined
May 30, 2007
Messages
3,463
Loc.
Greenbottom, WV
its real hard to find a powdercoater with a big enough oven to bake a cage in. at least around hear no one has an oven that big
 

lowbush

Bronco Guru
Joined
Sep 13, 2010
Messages
1,807
Loc.
Summerland Key, FL
its real hard to find a powdercoater with a big enough oven to bake a cage in. at least around hear no one has an oven that big

Yeah we had the same issue around here but now there is a local guy. I plan to build an oven at some point that can do a full Excursion Body and frame. They are actually pretty easy to build, some elements and a pid, then some metal 2x4's some insulation, and some of the roll sheetmetal and I will be in business.
 

bronconut73

Bronco Guru
Joined
Aug 7, 2012
Messages
9,919
Mine with a rattle can finish. Flat black. Love it.
 

Attachments

  • 0531141251.jpg
    0531141251.jpg
    90.8 KB · Views: 207

bronconut73

Bronco Guru
Joined
Aug 7, 2012
Messages
9,919
Yeah we had the same issue around here but now there is a local guy. I plan to build an oven at some point that can do a full Excursion Body and frame. They are actually pretty easy to build, some elements and a pid, then some metal 2x4's some insulation, and some of the roll sheetmetal and I will be in business.

There is Powdertech on Old Winter garden Rd. too.
 

TN1776

Bronco Guru
Joined
Oct 24, 2006
Messages
2,632
It is hard to beat powder coat. I initially spray painted my cage, but was really unhappy with the appearance and got it powder coated instead. Never looked back, never regretted that decision. Powder is super durable so it is a lot less likely to need to be touched up than paint so that argument in my opinion isn't a strong one. I have dragged muddy boots across my floor bars many times and the powder doesn't show any wear.

While he's a bit more expensive, look up Virga Customs on facebook (assuming you're on FB). His cages are about the nicest I've seen - they fit very tight against the body and maximize interior room.
 

BroncoJAK

Bronco Guru
Joined
Sep 24, 2002
Messages
2,813
My next cage will be from Gordon. Having wheeled with him a lot and watching his cage with the halo design slide along trees in off camber trails. My hoop design cage will catch and hang on the same trees. I think he offers to have them powder coated for a little more. Painting a cage sucks.
 

Yeller

Contributor
Bronco Guru
Joined
Mar 27, 2012
Messages
7,692
Loc.
Rogers County Oklahoma
I am a bit apprehensive of the "halo" cage design. Safety guidelines for every race association I'm familiar with specify a "loop" or arch construction. Check out, SCORE, NASCAR, SCCA, and NHRA rules. If designing a cage for the worse, possible scenario, being a high speed, violent impact, the priority becomes maintaining the integrity of the passenger compartment. In principle, an arch would be your strongest element.

Lots of theories on this, the arch is going front to back instead of side to side. Look at SCORE cars, most of them the arch is front to back not side to side. IMO a cage that has front to back bars is safer in a worst case, its more apt to slide than to catch and fold on the edges. most car associations don't take trees and rocks into the equation when your sliding on your roof or side at speed, also look up some trophey truck builds, they go either way depending on the designer, but they all have "slider bars" on them to not hang up on the corner in a crash. Gordon's cage is front to back.

this car as been rolled more times HARD than any of us can count, has had bars replaced but has never failed. There are aguements that this is a chassis and not a cage but the design elements are the same for the roof.http://www.youtube.com/watch?v=3JjxUcHx4lc

here's a better example, the other was slow and lamewww.youtube.com/watch?v=jkUqyyBe1qI same driver, and his other car... :)
 
Last edited:

needabronco

Bronco Guru
Joined
Jul 2, 2004
Messages
6,411
Loc.
Prescott/Farmington
Paul, my best cage advice is to go with an assembled cage that is advantageous with shipping. Since we don't know where you are it's a little hard to recommend someone. My personal preference is Protofab, but they are fairly local to me and I can go pick up bumpers and cages for far less than shipping. I also really like Bent Fabrication which is also pretty local.

As for the rattle can vs powder coat debate, I would probably rattle can it and run it for a couple of years, decide if you want to add any brackets or move anything, then once you have everything where you want it I'd have it powder coated.
 

lowbush

Bronco Guru
Joined
Sep 13, 2010
Messages
1,807
Loc.
Summerland Key, FL
Lots of theories on this, the arch is going front to back instead of side to side. Look at SCORE cars, most of them the arch is front to back not side to side. IMO a cage that has front to back bars is safer in a worst case, its more apt to slide than to catch and fold on the edges. most car associations don't take trees and rocks into the equation when your sliding on your roof or side at speed, also look up some trophey truck builds, they go either way depending on the designer, but they all have "slider bars" on them to not hang up on the corner in a crash. Gordon's cage is front to back.

The other piece to consider is Gordon's cage has double B pillars and floor bars so the hoop is just inverted. I personally think his cage is the best design on the market due to the double B pillars and the floor bars (floor bars have proven to be safer than frame-ties alone). Double B-pillars and lattice, help significantly with high-speed shearing in a roll.
 
Top