• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Roll Cage Kit

1971Bronco1971

Full Member
Joined
Sep 10, 2011
Messages
258
Loc.
Boston
Who makes a good roll cage kit? I am looking to get rid of the nasty looking one that came in mine and install a functional one that doesnt look like a bling guy welded it. I could bend one up but would rather not take the time it would be alot faster to buy a kit. Just looking for a 6 point
 

barronj

Bronco Guru
Joined
Jun 6, 2009
Messages
1,859
I bought a Tom's family cage 6 point kit. It was:

-affordable
-came with ample bolts for bolting it to the body
-the front hoop comes long enough that you can tuck it near snug to the windshield frame.

According to the tech rep from Tom's, Tom pinched the inside bar on the passenger side & was able to keep the stock glovebox door hinging system w/o modification.

If you run it close, like i'm talking about, you can still use your window crank when the door is closed. What you cannot do is open the vent window.

I had a highly reputable custom fab guy weld it up for $300. I tacked up the rear cage, but he cut those welds free & moved the interior rear bars out to match the front bars connecting points.

Toms wins out for affordability & quality.

smallfrontseats.jpg

smallbackseat.jpg
 

jasonv

Sr. Member
Joined
Jan 7, 2002
Messages
355
Hey Barron can you post some pictures of the glove box area? Did their pinch job enable the stock glove box to open on yours?

Thanks,
Jason
 

barronj

Bronco Guru
Joined
Jun 6, 2009
Messages
1,859
I did the hinge mod on mine. It was close, like 1/2", but they don't come pinched. You elect to have your person do it. It's key to have your doors on when they do the install. My guy also put a bend in the DS/PS floor plates to match the angles of the floorboard, b/c that's where the feet needed to be (as a result of hugging so close to the windshield), at the leading edge of the floorboard, with the rest about 25% in to the angle.
 

rtreads

Sr. Member
Joined
May 13, 2008
Messages
690
Loc.
5280
check ebay. Thats where I got mine. I got the unwelded one so that I could make it fit the way I wanted.

search "early bronco rollcage"
 

Brian B

Sr. Member
Joined
Feb 6, 2007
Messages
703
Have you looked in the Vendor Section. Mike from Extreme Custom Fabrication puts together kits for folks all the time. He has many more options than the other folks noted above. He's been part of the community here for a long time and is good people. FYI

That's were I got mine for my half cab. It's not installed yet but will be in less than a month.
 

hmh800

Sr. Member
Joined
Nov 5, 2009
Messages
365
Another vote for Extreme Custom Fab. I bought their family cage kit and it fits great.
 

greatguy57078

Contributor
Bronco Guru
Joined
Jul 15, 2006
Messages
3,430
Another vote for Extreme Custom Fab. I bought their family cage kit and it fits great.

That's what I did. I talked to Mike at Extreme Custom Fab in Dubuque Iowa, and he put togther a kit for me. I upgraded to DOM on everything and selected every option (grab bars - gussets - side bars, etc.). My son/daughter will be driving mine from time to time and you just can't be safe enough! That and I do wind her out to 80-90 once in awhile on the Poker Runs!;D

Mine looks similar to this one but I had mine made for a halfcab. I will post pics after I have Bronco Connection install the cage and new front floors VERY soon!:p
 

Attachments

  • ECF CAGE.jpg
    ECF CAGE.jpg
    62.3 KB · Views: 83
OP
OP
1971Bronco1971

1971Bronco1971

Full Member
Joined
Sep 10, 2011
Messages
258
Loc.
Boston
Ok I took the leap and bought my own bender figure I can add that to the list of things I can do at the shop. Tube will be here monday so gonna start on building my own cage. I couldn't find one to buy like I really wanted I will try to post pictures as I build it if I can ever figure out how to get them on here
 
Top