Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
If you have problems registering or can't log into your account, please contact Admin.
Not to hijack but to add i Would be interested if anyone is using BC Broncos full cage with a bestop/rampage and if you can recline a top as well. I may go with the BC top but just wondering.
That is a good question. I don't honestly know of any limitations with reclining the soft tops on any of the roll bars. Will be interesting to see if anyone is having an issue and with what cage.
If there were an issue I guess it would be one of the family cages most likely.
I have a full cage from Xtreme Fabrication (I think thats it). I have a rampage soft top as well. I cannot put the top down over the rear hoop. I just barely hits. If I had made the hoop 3/4" lower than the middle hoop it would have cleared. I ran the top of my cage level with the top of the tub.
Rmiller747, could you post specs on the baby blue rig in the middle picture please. Sorry for the slight derail of this thread, just think that rig is SWEEEEET
Rmiller747, could you post specs on the baby blue rig in the middle picture please. Sorry for the slight derail of this thread, just think that rig is SWEEEEET
PM me what info you want. Some basics. Thanks for the compliment. I have several broncos and this is the family favorite. Probably because we use it the most and trail in it.
I just wondered if the back of the family/full cage would stop you from lowering/raising your soft top? Any input of what you did or didn't do to about this issue would be helpful. Also what cages. This could save people the headache in the future. Thanks!