Anyone make one? I searched and see Coyote ones and swap ones, but I will probably need to move my engine forward the tiniest amount...like 1/4-1/2" (now I'm even more glad I did the Explorer front swap!
I put the engine in and then test fitted the intake and that's a little too close. Might be better or worse due to angle when I put in the tranny.
Would be good if I could move it just slightly forward if I have room to do it.
Any other thoughts?
![IMG_4916.jpg IMG_4916.jpg](https://classicbroncos.com/forums/data/attachments/900/900853-2b7919f6745b57f6ecf2e0168ad7d45e.jpg)
I put the engine in and then test fitted the intake and that's a little too close. Might be better or worse due to angle when I put in the tranny.
Would be good if I could move it just slightly forward if I have room to do it.
Any other thoughts?
![IMG_4916.jpg IMG_4916.jpg](https://classicbroncos.com/forums/data/attachments/900/900853-2b7919f6745b57f6ecf2e0168ad7d45e.jpg)