• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

scrapin it out

bax

Contributor
Old Member
Joined
Aug 22, 2005
Messages
14,549
Ok I am taking the motor and trans out of this today. It's a 77. It has a good running 351 with a C6. Only 36k on the odomoter. I am getting that for a possible buggy build. It also has a dana 70 in the rear, it is set up with duals and the rear is really not that wide. Do you think that rear would make a good buggy rear. Take off the duals of course. Anyone else see anything you might want. Someone wanted the dash. It's a big ass camper and still has the household equipment in it.

Bax
 

Attachments

  • P1010002.JPG
    P1010002.JPG
    74.3 KB · Views: 63
  • P1010011.JPG
    P1010011.JPG
    67.5 KB · Views: 81
  • P1010001.JPG
    P1010001.JPG
    79.9 KB · Views: 45

Broncobowsher

Total hack
Joined
Jun 4, 2002
Messages
37,073
That has a tilt column without the lock cylinder on it, good find. (you can see the ignition on the dash by the headlights)

From as clean as it looks, I bet it really is 36k. Most motorhomes look completely trashed well before the 100k mark. That looks like it has done a lot of sitting around.
 

22213evl

Bronco Guru
Joined
Mar 14, 2007
Messages
2,369
Loc.
Rio Rancho N.M.
I've got one with 32k/460/c-6 a little bigger than that one, towed the bronco out to the stampede with it last year. it's a 76, nice find Bax.
 

Attachments

  • pede 001.jpg
    pede 001.jpg
    75.1 KB · Views: 70
  • pede 005.jpg
    pede 005.jpg
    52.9 KB · Views: 105

cs_88

Contributor
Bronco Guru
Joined
Jul 28, 2005
Messages
1,324
I'd leave the duals on the buggy. That would be badass.
 

NicksTrix

Bronco Guru
Joined
Aug 1, 2001
Messages
6,409
maybe the a/c for mine...?

thought about turning the camper into a buggy? you could be the only one in the sippy hole that's driving a no tell motel!
 

mustangtoby

Bronco Guru
Joined
Nov 28, 2007
Messages
1,757
Loc.
southwest Colorado
That dash is the same as the pickups of those years, Bax. You might find some guys who want the inst. panel, etc for a truck. That looks to be in really good shape. I bet a lot of it will interchange with 73-79 trucks and 78/9 FSB's.
 
OP
OP
bax

bax

Contributor
Old Member
Joined
Aug 22, 2005
Messages
14,549
Someone wanted the dash now that you mention it. I will have to go back and see if I can find out who it was. Yes the dash is in good shape.

Nick I will check out the A/C
 
OP
OP
bax

bax

Contributor
Old Member
Joined
Aug 22, 2005
Messages
14,549
OK I got the engine 351W, and C6. I also got the dana 60 out of the rear. It's not too special. 3.73 open. However it is heavy as heck. I guess I will pull the steering column and dash gauges.
 

csjr

Sr. Member
Joined
Apr 18, 2007
Messages
675
Loc.
Lighthouse Point, FL
A buddy of mine took a hot water heater out of one of those and plugged and plumbed it into an outdoor shower next to his shop. He would just shower there after working on his filthy rigs. Saved a lot of dirt inside the house--and DANG was that water hot!

Hey, rent that thing out to some French Fries coming down for the winter...earn your purchase price back.
 

Smokeater11

Bronco Guru
Joined
Jun 14, 2006
Messages
1,971
Loc.
Auburndale,FL
Hey Bax are you going to build your buggy off a Bronco frame or make it a tube frame chassis? Reason being is that I have the '66 frame here that has to have the front completely redone. You could have a clean slate to work from and other than the front end issues the rest of the frame is in great shape. Just surface rusted from sitting outside after I wire wheeled it. It's not doing me any good just sitting here. You know the price would be right too!! Just let me know.
 
OP
OP
bax

bax

Contributor
Old Member
Joined
Aug 22, 2005
Messages
14,549
To tell you the truth mark I am seriously considering building a full track. It would be all tube frame from scratch. Do a search on "Ripsaw" I want that.
 

Smokeater11

Bronco Guru
Joined
Jun 14, 2006
Messages
1,971
Loc.
Auburndale,FL
I already know about "ripsaw" that thing is unbelieveable. If you can pull that thing off you will be a god!! Especially if you can skin it with Bronco parts.
 

Scoop

Contributor
Bronco Old Fart
Joined
Feb 1, 2006
Messages
11,116
Loc.
Cuchara, CO
Here's an idea - why not replace the van cab with an early Bronco front half of the tub (doors forward) and shortened front clip? Now that would be the ultimate early Bronco camper! ;D

That vintage motorhome looks too nice to part out. :cry:
 
Top