Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
If you have problems registering or can't log into your account, please contact Admin.
Tom's Bronco Parts did a video on this subject. I believe the bolt location they recommended was about 34" above the floor. That's what I did and it worked well.
Tom's Bronco Parts did a video on this subject. I believe the bolt location they recommended was about 34" above the floor. That's what I did and it worked well.
The lower bungs on my cage were too low, now that I installed carpet, and mounting the retractable mechanism was a PITA to secure. So... don't weld your lower bung too low!
Here’s my set up - threaded bungs for front and back facing inwards. For the fronts, I have the retractors attached to the middle cage mounts since it provides more clearance on the floor than the stock seatbelt locations. For the rear retractors, they are mounted to the stock rear seatbelt locations.