Securing brake lines?

[Jaybr]

New housing and ran new brake lines that I bent myself. Wondering if I should put a bracket to hold the lines in place similar to the factory setup?

Bent this up and was thinking I’d weld to the housing and paint it black. Do I need more than 1 on the passenger side? And do I need one on driver side? Does my bracket look ok?

Sent from my iPhone using Tapatalk

 

[Jfryjfry]

It looks great but is too big. But I would just slip a 1/2” long piece of rubber hose over the lines before you flare the second one and let your bracket grab the rubber hose.

 

[Jaybr]

I can make it smaller, I just used a screwdriver for the loop. I like the rubber idea but the lines are all done so hose won’t work.


Sent from my iPhone using Tapatalk

 

[Major Tom]

you could still slit the rubber and put it in place

 

[kylakekevin]

Cut the hose length so you can slip it over the line now. Brackets look great!

 

[Bronco4x4]

Looks good. Suggest stainless.

 

[Jaybr]

Looks good. Suggest stainless.

That would be awesome but I’d have to go shopping, lol.

This came off a fender I pulled out of a neighbors scrap pile.


Sent from my iPhone using Tapatalk

 

[EPB72]

Instead of hose use marine style shrink wrap as an option .