BoureeOne
Bronco Guru
Circumstances are forcing me to sell my project. I no longer have the time or the resources to finish this. I am posting this here first. I have thoroughly loved being on the site. It will take me a little time to get all the parts in one location. Things have been in storage for a couple of years. I will try to give the breakdown of what I have. I will also start posting pics soon. I will certainly lose money on this situation, but I am ok with that. I have just about all of the 66 goodies that people really want.
1966 Wagon:
66 tailgate - excellent condition - body worked, primed.
66 hardtop - with correct liftgate and spare parts. - excellent condition
67 doors - I acquired these so the beltline trim could be added - excellent condition
66 eyebrow grill - excellent condition
66 windshield
Mexican 302 rebuilt to 347 - everything listed is new....
Centerforce II Clutch and Pressure Plate
Dana 30 front end and 9" rear-end have both been gone through by Zimmer Gears in Baton Rouge. Both are 4:11 gears. The Dan 30 even has the orig brass tag and brass filler.
Power steering from 78' Bronco- all new seals
Bilstein shocks and steering stabilizer
23 Gallon Fuel Tank
Adjustable Track Bar
Wild Horses 2 1/2 " lift
Wild Horses 2" body lift
Wild Horses front disc conversion
Rebuilt rear drums
Wilwood Reservoir and proportioning valve
1999 F250 Hydroboost
All new brake lines
New fuel lines
Frame has zero rust. Was sandblasted and treated internally and exterior with Eastwood coatings.
5 New BF Goodrich Radial Terrains 265/75/R16, mounted on 5 new American Racing Aluminum Rims
Custom rear bumper with tire carrier
Body Tub is sitting on custom made rotisserie - Tub was sandblasted and primed.
New Body Parts
Have installed custom setup to accommodate side folding rear Mitsubishi Montero rear seats. Extremely cool set-up.
Have a set of Cobra Roadster side pipes. Love the look and the sound. You can of course change this if desired.
I am sure I am missing a few things that I can't think of. The drivetrain is complete and ready to go. Main work left is body work.
For the right person or Bronco builder, this will be a great deal. Finish and flip for a very nice profit. Or keep and enjoy. This could very easily be one of the best deals around.
I am selling everything for $20,000..... This is non-negotiable because I know I have over double in this. Shoot me a PM if you are interested.
Video of drivetrain and engine running....
1966 Wagon:
66 tailgate - excellent condition - body worked, primed.
66 hardtop - with correct liftgate and spare parts. - excellent condition
67 doors - I acquired these so the beltline trim could be added - excellent condition
66 eyebrow grill - excellent condition
66 windshield
Mexican 302 rebuilt to 347 - everything listed is new....
- Explorer serpentine
- A/C compressor
- 4G alternator
- Power steering with PSC reservoir
- Aluminum Radiator with 2 speed Derale Elec fan
- New motor mounts
- Mallory Uniltite Dist
- MSD coil
- Edelbrock Intake and AVS 650 carb
- Polished shorty headers
- Taylor Plug wires
- Fuel Lab Filter
- Carter Fuel Pump
- Fram inline oil style pre-pump filter
- High rise alum valve covers
Centerforce II Clutch and Pressure Plate
Dana 30 front end and 9" rear-end have both been gone through by Zimmer Gears in Baton Rouge. Both are 4:11 gears. The Dan 30 even has the orig brass tag and brass filler.
Power steering from 78' Bronco- all new seals
Bilstein shocks and steering stabilizer
23 Gallon Fuel Tank
Adjustable Track Bar
Wild Horses 2 1/2 " lift
Wild Horses 2" body lift
Wild Horses front disc conversion
Rebuilt rear drums
Wilwood Reservoir and proportioning valve
1999 F250 Hydroboost
All new brake lines
New fuel lines
Frame has zero rust. Was sandblasted and treated internally and exterior with Eastwood coatings.
5 New BF Goodrich Radial Terrains 265/75/R16, mounted on 5 new American Racing Aluminum Rims
Custom rear bumper with tire carrier
Body Tub is sitting on custom made rotisserie - Tub was sandblasted and primed.
New Body Parts
- Rear uncut Fenders
- Uncut front Fenders
- Inner front Fenders
- Core Support
- Blank Dash
Have installed custom setup to accommodate side folding rear Mitsubishi Montero rear seats. Extremely cool set-up.
Have a set of Cobra Roadster side pipes. Love the look and the sound. You can of course change this if desired.
I am sure I am missing a few things that I can't think of. The drivetrain is complete and ready to go. Main work left is body work.
For the right person or Bronco builder, this will be a great deal. Finish and flip for a very nice profit. Or keep and enjoy. This could very easily be one of the best deals around.
I am selling everything for $20,000..... This is non-negotiable because I know I have over double in this. Shoot me a PM if you are interested.
Video of drivetrain and engine running....
Last edited: