SOLD Serpentine Belt Drive Ford Explorer 5.0 L

[sanndmann3]

For a limited time, $300 to your door for cont. U.S.

 

[sanndmann3]

Friday bump... can still do $300 to your door for a short while...

 

[sanndmann3]

hump day bump...

 

[L&D's Broncos]

Explorer 5.0 Serpentine Setup

Well, for a Saturday night bump I will say I got all parts when and as promised. All cleaned up and refinished and ready to go! Great deal on a great upgrade. This setup is going on Lisa's Bronco II. Thanks Again! Highly Recommended!

 

[sanndmann3]

(almost) Easter bump... got one all nicely cleaned up, in the box and ready to go...

 

[CH3NO2jim]

I am very interested in what you have. How much and what all is included?

 

[pcoriginal]

Since it's coming off an Explorer, I'd assume it's set up for a reverse rotation (CCW) water pump?

 

[sanndmann3]

Yes, that is correct.

 

[sanndmann3]

bumpity bumpity bump

 

[56f100bbw]

Very nice set up ,clean parts ,installing mine today it 's way better than making a trip to the junk yard

 

[Broncoman1966]

Interested in a serpentine setup im me here. Easier by email jhogan@gocats.org as I do not check this page everyday. Thanks Mark

 

[lilthom]

another satisfied customer

Well I will get on board praising this set up that Sanndmann3 has put together. Looks great and can't wait to get it all attached. The idler wheel on what he sent me was bad and didn't hesitate to reimburse me for buying a new one. Great Bronco brother!

 

[Irishjig13]

Sandman - do you have another set available? I am strongly considering the upgrade. As soon as I hear back from you I'll let you know. Still $275 delivered? Thanks, Kevin

 

[sanndmann3]

Lilthom, thanks for the kind words and good luck with the install. don't hesitate to hit me up for any other Q's.
Irishjig13, sent you a p.m. got one almost ready to go...

 

[Petraszewsky]

How far from the face of the engine block are the front faces of the pullies on this setup?

 

[Irishjig13]

Hey everyone - just wanted to let you know I just received my setup from Don. Everything looks new and am looking forward to installing it. I am going with the GM power steering pump. Don is definitely a stand up guy with a reasonable.price for a very nice looking product. Kevin

 

[sanndmann3]

thanks for the kind words, hopefully things go smoothly with the install. Don't hesitate to ask any questions.

Petraszewsky, best i can tell is 5.5" from the face of the block to the front face of the pulleys...

 

[Petraszewsky]

Thanks for the reply. That's much closer than the stock which is roughly 9.5" from the block to front face of pulleys. That's a lot more room for thicker radiator and large e-fan.

 

[luke_hopper]

intersted in a serp set up, can you still do 300 shipped to 85018?

 

[56f100bbw]

Serpentine set up

Got my second set up today looks great fast shipping thanks