• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Shortening my auto column

rydog1130

Contributor
Bronco Guru
Joined
Jun 19, 2014
Messages
4,188
I’m contemplating shortening my auto column by cutting the spot welds on the bracket and pushing it forward 2-3.5” inches. I’ve taken some pictures and my biggest concern is the shift arm linkage coming into contact w/ my headers. I’m not physically able to look at it being in a wheelchair so I’m relying on the photos my dad took for me. I know I have to shorten my lower steering shaft and extend the linkage for it to work. The photo w/ out my booster bracket looks like there’s plenty of room but these newer pictures make it look tighter. Just wondering what your thoughts are?
C0011F6C-C20C-4776-84F8-094BB9B841CA.png
29BFC9B2-89B8-4808-8B54-06EC32FD4E7E.jpeg
98302E71-FAE5-412E-B760-595B4990D418.jpeg
9D705D73-BB93-49C8-BF19-6F91402D944A.png
98302E71-FAE5-412E-B760-595B4990D418.jpeg
 
OP
OP
rydog1130

rydog1130

Contributor
Bronco Guru
Joined
Jun 19, 2014
Messages
4,188
so i came up with an idea that should work. I plan cutting the spot welds on my column and moving it back 3". I also think i can modify my shift linkage arm by cutting it in half and adding a piece of steel 3" long steel to keep the linkage location in the same place. it will look like the arm in the picture
IMG_5017.jpeg
 
Top