Show us your Transfer case

[1971BroncoSport]

here is what mine looked like

What colors did you use for transmission and transfer case?

 

[Crush]

I can answer that cause deano and i did them together. Trans was cast aluminum hvt. Tcase was cast iron hvt with black outputs and aluminum shift rods. Plus I used a sharpie and made all the casting markings black. Then I used hvt clear over all of it for protection. Looked real nice

 

[Deano]

Thanks Crush!

 

[bigcountry]

just finished rebuilding Saturday. it has the 1/4" spacer I made attached to it. It is an np205.

 

[Crush]

Anyone else?

 

[DEEPWOODS]

NP205 cleaned up I have not rebuilt it Yet

 

[dave67fd]

What was your cleaning process for most of these? Sandblast, wire wheel, just degrease etc..

 

[fatboy]

What was your cleaning process for most of these? Sandblast, wire wheel, just degrease etc..

Dave here is how I did mine, plus some pictures of the case before I sent the whole project packing. http://classicbroncos.com/forums/showpost.php?p=2290146&postcount=423

Sorry the original pictures are on a different machine.

 

[BRONCOBERT]

Was I supposed to take it out for the picture? JK ;D

 

[hardcharger]

 

[Crush]

I used break cleaner scrapers and rags to clean mine. Then I bought a pressure washer. Lol

 

[KyddsPly]

Mines lonely. It needs a friend.

Soon

 

[ILikeBond]

Just finished rebuild. Dana 20 with 3.15 terralows, WH HD output shaft, and BCB gear gawker cover, Mated to an NV3550.

 

[Letsgocrawling]

Wish it was a ATLAS But did go with big output shaft and 1410 yokes

 

[Buldozer]

Here is mine several years ago. I am contemplating taking it out and rebuilding it this spring

 

[glass76]

With a Koenig PTO.

 

[Joker11]

What are you driving the with the PTO?

 

[glass76]

A Koenig winch.

 

[Mountain Ram]

For something totally different... NP241 behind an NP231 range box all mated to a C6. I will be ditching the slip yoke prior to hitting the trails. Running 1410 yokes on the rear and 1350 front.

 

[xcntrk]

Here's one gutted:

And my little work-around to obtain individual twin-stick operation on a T-case using a limiter strap:
[youtube]PgfoN99zc5c[/youtube]