• Just a reminder that you won't be able to start new posts or reply to existings posts in the Archive forum.

    This is where all the old posts go so they can still be used for reference and searched.
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Slight play in front hub

chrisd0729

Sr. Member
Joined
Jul 12, 2003
Messages
609
Loc.
Churchville, PA
I have a small amount of play in my front left hub. I was putting new brakes on yesterday and noticed I can move the entire hub assembly (wheel mounting surface and all) up and down a little bit. How do I tighten this up?
 

Mr Joe

Bronco Guru
Joined
Dec 2, 2003
Messages
2,212
Sounds like a loose wheel bearing, You can tighten it up a little, but I like to pull them out and re-pack them first.
 

Flash69

Bronco Guru
Joined
Jul 21, 2004
Messages
2,429
Loc.
Southwest Va
chrisd0729 said:
I have a small amount of play in my front left hub. I was putting new brakes on yesterday and noticed I can move the entire hub assembly (wheel mounting surface and all) up and down a little bit. How do I tighten this up?
Sounds like bearings but, It could be your King pins or Ball joints which ever you have. You need to check that out too, To be on the safe side.
 
Top