Small lifts- anyone have any photos?

[DirtDonk]

Looks like the fronts are a bit bigger, 1/2-3/4 overall, so those are close to 14", and looks like they will probably just fit. Looks like Bronco specific parts on the Axle, or F100 pickup.

Looking like really nice parts you got there. Already done and done.
The brakes are standard GM/Ford parts and should fit most 15" wheels no problem.
I say "most" though because now and then there are wheels with thick webbing that will rub. Sometimes a slightly bent bracket will do it too.
But the only one of those I ran into (thick wheels) was easily fixed with a few taps on the caliper bracket to move the high spot inward slightly. Worked perfect.

Paul

 

[markw]

I think the 1.5 lift and 1" body lift looks perfect on uncut. I rolled the inner lip of my wheel openings and reinforced with 3/8" rod, trimmed the front edge where it rolls under and have never had any issue rubbing with 33" tires. Most important and hardest to do I think is keeping it level.

 

[Bronco Junkie]

This is my old uncut Bronco with 2.5" suspension lift.

 

[Maddog B]

2.5 lift with 1 inch body lift bushings. 31x10.50’s on stock wheels.