SOLD Small original 67 parts - Cleaning Garage

[Randrew]

Have the following. Come get them before they hit the junk yard.

1/4" Wheel spacers x2, $10
2 Drop pitman arms, 1 keyed (still available), 1 fully indexed SOLD. $20 each
SOLD Duff 3 speed floor shifter with cover plate (has hole for switch on front of tunnel cover), $50
SOLD Stock Driveshafts front and rear $40 each
SOLDStock alternator and brackets SOLD
Clutch throw out arm and pivot bracket $5
Random brackets, FREE
Throttle linkage, FREE
3 on the tree shifter and linkage parts $10
Tcase T shifter, bracket $10
Transmission crossmember, $10
5 blade fan, SOLD
WH steering stabilizer (no brackets) $10
Stock 28 Spline small bearing Rear Axle shafts with bearings $60 for both

 

[BigToe]

Any pics of the drop pitman arms? I'm looking for one that will fit a stock power steering box on a 75.

 

[Randrew]

Any pics of the drop pitman arms? I'm looking for one that will fit a stock power steering box on a 75.

I edited the post above with two pics of the pitman arms. One of them is a Wild Horses drop arm that came with my 3.5" lift for a late 66-75 manual box. The other was purchased later from Wild Horses and the only difference is that it is fully indexed. I now have tie rod over with a 76 PS box, so I don't need these. Not 100% sure if either will fit the 75 PS box, but WH only lists two arms, one for late 66-75 and one for 76-77, so I think it will fit.

 

[BigToe]

PM'ed ya.

 

[Teal68]

Would you mind posting pics of the floor shifter and cover please. Any issues with it?

 

[rbrodder]

Interested in the 3 speed floor shifter with cover plate, $50.
Thanks Rich

 

[Randrew]

Added some pics of the Duff Floor Shifter to the original post. I bought it used from someone a long time ago and never installed it before I went with a ZF trans. It appears to be in functional condition. The tunnel cover has a hole in it for a switch. Shifter handle is in great shape except for some fading on the shift pattern on top.

 

[Stockbroker5]

Do you still have the steering stabilizer? Mine was dead no rebound in or out.
I drive through Tempe to and from work. PM if you still have it.
Thanks

 

[Randrew]

PM Sent about the steering stabilizer, Stockbroker5

 

[Randrew]

It's all gone now.