• Just a reminder that you won't be able to start new posts or reply to existings posts in the Archive forum.

    This is where all the old posts go so they can still be used for reference and searched.
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Small six question

Braddw25

Full Member
Joined
Jan 23, 2009
Messages
287
Loc.
Jersey Shore, PA
Does anyone know for sure whether or not the 170 small six was ever made with 7 main bearings?? The falcon 6 performance handbook that I just bought seems to indicate that all 170s hand the 4 main bearings. However, it also indicates that engines with 4 main bearings only have 3 frost plugs and the 7 main bearing engines have 5 frost plugs. It all made so much sense to me until I looked at my motor which I believe to be a 170 this morning and discovered that it has 5 frost plugs!?!!??!? Could somebody help unconfuse me here. Is the handbook wrong or is it possible that it is only referring to 170s in Falcons and maybe there were some 7 main 170s that went into Broncos. Or do I possibly have a 200 six instead of a 170 as I previously believed. Thanks for any help.
 
OP
OP
B

Braddw25

Full Member
Joined
Jan 23, 2009
Messages
287
Loc.
Jersey Shore, PA
Thanks for the replies I appreciate it. I had a feeling that it might be a 200 when I saw those 5 plugs. It also has quite a bit of power compared to most 170s I've driven especially since I got the throttle cable adjusted rigth. I've heard many stories of 170's topping out around 55-60 mph. Mine will hit 80 without too much trouble on a straight level road. Thanks again for the info!
 

Broncoman

Bronco Guru
Joined
Nov 29, 2001
Messages
1,873
I know this is a little late. I found an article about small sixes....it mentions the seven main 170.

Look at the last paragraph. I have the eight other pages too.
 

Attachments

  • 3.jpg
    3.jpg
    121.6 KB · Views: 47

casadejohnson

Bronco Alchemist
Joined
Jan 21, 2005
Messages
3,587
I would like to see the other pages if you can post them. Or if its easier I'll send you my email.
 
OP
OP
B

Braddw25

Full Member
Joined
Jan 23, 2009
Messages
287
Loc.
Jersey Shore, PA
Thanks, Broncoman. That is very interesting. So now I'm back to not being sure.;D I checked the numbers on the block this morning and it has a C6DE code which according to the Falcon 6 handbook I bought means it's a 170. Until I read that article you posted, I thought there was no such animal as a 7 bearing 170. Apparenly there is, and I guess that's what I've got. Thanks again, and if possible I'd like to read the other 8 pages of that article too.
 

Broncoman

Bronco Guru
Joined
Nov 29, 2001
Messages
1,873
here you guys go. I put all 9 in order
 

Attachments

  • 8.jpg
    8.jpg
    98.6 KB · Views: 37
  • 7.jpg
    7.jpg
    108.4 KB · Views: 34
  • 6.jpg
    6.jpg
    116.1 KB · Views: 35
  • 5.jpg
    5.jpg
    89.5 KB · Views: 30
  • 4.jpg
    4.jpg
    104.4 KB · Views: 29
  • 3.jpg
    3.jpg
    121.6 KB · Views: 25
  • 2.jpg
    2.jpg
    115.5 KB · Views: 40
  • 1.jpg
    1.jpg
    114.6 KB · Views: 36
  • 9.jpg
    9.jpg
    101 KB · Views: 35
OP
OP
B

Braddw25

Full Member
Joined
Jan 23, 2009
Messages
287
Loc.
Jersey Shore, PA
Thanks, that's a great read. I'm really falling in love with these little sixes. In fact, I am in the process of buying another EB a 74 to stuff the 400 in that I was going to put in my '71. Now that I have my throttle cable adjusted right, the 71 is downright peppy and I have this thing about removing something from a vehicle that is working. The 74 I'm trying to buy has a blown motor so it'll make a better place for my EFI 400 to go. Now I just need a bigger garage!;D
 

grant_71

Bronco Guru
Joined
Aug 6, 2002
Messages
1,936
Well, if it is apart on the stand, (i am making assumptions since you can see the mains) you could always measure Bore and stroke then

Displacement= ((3.14*bore^2)* Stroke)*6
Where 3.14 is pi, and 6 is the number of cylinders

It should get you close enough to know what motor you have
 
OP
OP
B

Braddw25

Full Member
Joined
Jan 23, 2009
Messages
287
Loc.
Jersey Shore, PA
Grant, thanks for the reply. It's not apart on a stand and I can't actually see the mains. However, on the passenger side of my block there are 5 freeze plugs which according to everything I have been told and read means that it's a 7 main bearing block. The 4 bearing blocks only have 3 plugs. Thanks again for the reply though!
 
Top