Sniper WOT Timing

[turbotim2]

Curious what you guys put in for a WOT ignition timing on initial startup with your sniper EFI?

 

[74 Bronco Billy]

Following?

 

[Broncobowsher]

34 is typically good power and still safe

 

[turbotim2]

34 is typically good power and still safe

Thanks!
I will use that when I get the Sniper back. I got a bad one from the factory apparently...

 

[73azbronco]

32 total max if using hypereutectic pistons

 

[Action]

Mine is set to 35 but i haven't run it there enough to know if it likes it or not....

 

[Action]

so mine is 10 starting....20 idle.....40 cruze....35 wot......

 

[Broncobowsher]

32 total max if using hypereutectic pistons

That is really conservative. My initial thought was 34-36, but I thought I would start with a conservative number and just say 34. Looks like a lot of others are splitting my window at calling it 35.

The 40 at cruise, that is the equivalent of vacuum advance on top of the mechanical advance. You almost have to get the USB laptop cable to go in and play with part throttle advance to dial in the cruise fully.

 

[turbotim2]

I settled on 18 at idle, 36 at cruise and 32 at WOT. It's running really good right now so I am leaving it here for now. Once the engine is fully broken in, I may change some things.