• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

SpareParts Build Thread...Linked and tons!

OP
OP
SpareParts

SpareParts

Bronco Guru
Joined
Nov 13, 2004
Messages
5,595
Been a little busy on my own stuff in the shop as well as helping some buddies out. I finished off the rest of the rear quarter armor. All is plated in 3/16" steel.

ynyry9an.jpg


unebyqa5.jpg


2ereruda.jpg


su7unyby.jpg


u9e4e7y2.jpg


semy3y8a.jpg


y6ydypa8.jpg
 

ScanmanSteven

Bronco Guru
Joined
Dec 19, 2010
Messages
1,129
David, did you fab the whole tail lite section? How did you get the curvature of the panel for the front section.
 
OP
OP
SpareParts

SpareParts

Bronco Guru
Joined
Nov 13, 2004
Messages
5,595
I'm going to weigh them before I put them back on. I don't think they are as heavy as most think.
 
OP
OP
SpareParts

SpareParts

Bronco Guru
Joined
Nov 13, 2004
Messages
5,595
I fabbed the whole rear tail light section last year. This year I did the lower fronts. I had/helped Haslag Steel roll and bend them to match my front quarters.
 
OP
OP
SpareParts

SpareParts

Bronco Guru
Joined
Nov 13, 2004
Messages
5,595
Not really... It's just to hang the armor on! Mines a bit heavier than your panels though. Still haven't weighted them. I'll try to get to that today.
 

BIGED

Guru ????
Joined
Oct 30, 2007
Messages
2,003
David likes to stand out from us small guys.:)

Looks good I know you'll sure test them in a couple of weeks.
 
OP
OP
SpareParts

SpareParts

Bronco Guru
Joined
Nov 13, 2004
Messages
5,595
Been working on some more fiberglass speaker enclosures for the rear of the Bronco. Putting 6 1/2" Kicker Marines in them.

edehuhev.jpg


a9ajadep.jpg


4a2u9esa.jpg


uhe2y3u5.jpg


deheqezy.jpg


eha2ebu7.jpg


una4epym.jpg


du9aqu9e.jpg
 
OP
OP
SpareParts

SpareParts

Bronco Guru
Joined
Nov 13, 2004
Messages
5,595
Spare Parts.......Growing UP !!!!

Finally got my new shocks, the Bronco rides a lot smoother with a properly valved shock. Rear shocks gave a little bit of challenge to get installed. The pass. side sheet metal had to be clearanced to allow for the shock body to clear. The drivers side was already done as the 3 link will pull the axle to the pass side when dropped out. Defiantly worth the extra work.
58e858204ef7cb145c91d3634d37d8f3.jpg
c6514add0165d39a5b17b606b1a4b61d.jpg
fe0506a68798519eb54f4bbac0afefab.jpg
1923d7ad051f0c6fb640d35980e250c7.jpg
88cb07d92b596de99549573df99a99e5.jpg
 
Top