Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
If you have problems registering or can't log into your account, please contact Admin.
Been a little busy on my own stuff in the shop as well as helping some buddies out. I finished off the rest of the rear quarter armor. All is plated in 3/16" steel.
I fabbed the whole rear tail light section last year. This year I did the lower fronts. I had/helped Haslag Steel roll and bend them to match my front quarters.
Finally got my new shocks, the Bronco rides a lot smoother with a properly valved shock. Rear shocks gave a little bit of challenge to get installed. The pass. side sheet metal had to be clearanced to allow for the shock body to clear. The drivers side was already done as the 3 link will pull the axle to the pass side when dropped out. Defiantly worth the extra work.