• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

spindle spacer chevy disc swap

jamesf7278

Sr. Member
Joined
Jul 15, 2011
Messages
387
Loc.
Salmon Arm B.C
did a little hunting on google and couldn't come up with much but there is a little info on using a spacer on stock drum spindle for chev disc conversion - anybody using this? does it work well? and is it safe? believe it or not the chev spindles are getting hard to find where I live
 

BRONCROB

Bronco Guru
Joined
Nov 24, 2010
Messages
1,613
Loc.
WISNER LA.
I used the spacers on mine and everything worked great.About the only difference was I had to use a bolt and washer to replace the snap ring on the axle.They are 2.5 O.D.X1.785 I.D.X3/16 THICK with a bevel that mimics the inner race of the bearing.
 

BRONCROB

Bronco Guru
Joined
Nov 24, 2010
Messages
1,613
Loc.
WISNER LA.
I used a lathe to make mine but you could use whatever you got to bevel them.You will need to take off as much as the bearings have removed from them.You can see how much I took off of mine.
 

Attachments

  • uploadfromtaptalk1410712387066.jpg
    uploadfromtaptalk1410712387066.jpg
    72.8 KB · Views: 104
Top