• Be EXTREMELY cautious if someone offers to buy your Bronco for more than your asking price and sight unseen. ESPECIALLY if the buyer is overseas. It's probably a scam.

    Discuss it more here:
    http://classicbroncos.com/forums/showthread.php?p=514932
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

CA Stock K/H steel wheel 1966

Status
Not open for further replies.

elan

Full Member
Joined
May 27, 2015
Messages
541
Loc.
s
Looking for a Kelsey Hayes steel wheel for a '66 Bronco. Keep in mind these are not like the later wheels with the small K/H. Rather a proper wheel with the large K/H and of course FORD opposite the letters.

I don't care about the paint. I can't have any pitting from rust and the wheel must be true and of course the proper width of 5.5

Regards

Zip 92024
 
OP
OP
E

elan

Full Member
Joined
May 27, 2015
Messages
541
Loc.
s
Now that I think about it, I may be full of beans thinking these are Bronco '66 wheels. But, the same wheels are on all four corners....I assumed, and you know where that gets one.

Also, all four are spot/machine welded. I'm thinking early wheels would have been riveted. Any who, here are a couple of pix and maybe someone can chime that is all knowing. Also I cannot locate any dates codes on the these front or back. These are 15"s
 

Attachments

  • IMG_4541.jpg
    IMG_4541.jpg
    53.1 KB · Views: 194
  • IMG_4542.jpg
    IMG_4542.jpg
    60.5 KB · Views: 153
  • IMG_4543.jpg
    IMG_4543.jpg
    53.9 KB · Views: 184

BajaFresh75

Bronco Guru
Joined
Jan 26, 2005
Messages
5,486
These are early wheels, and as far as I know they were only on '66's. The stamping was changed shortly after. I have a few of sets, but I don't think I have any extras. I've been hoarding these for years, as not many people notice the K/H, or care for that matter. I care!!
 

BajaBronco

Contributor
Bronco Guru
Joined
Apr 30, 2003
Messages
3,984
Now that I think about it, I may be full of beans thinking these are Bronco '66 wheels. But, the same wheels are on all four corners....I assumed, and you know where that gets one.

Also, all four are spot/machine welded. I'm thinking early wheels would have been riveted. Any who, here are a couple of pix and maybe someone can chime that is all knowing. Also I cannot locate any dates codes on the these front or back. These are 15"s


elan, I've seen them both ways on 66. rivetted and welded.

Lotus Elite
 
OP
OP
E

elan

Full Member
Joined
May 27, 2015
Messages
541
Loc.
s
Still looking. I'll take one or four. I had one kind offer of a set but the wheels were pitted.

I live in a desert (zone 9)............"we shy from pits".

Regards
 
Status
Not open for further replies.
Top