• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

STOCK SEAT ANGLE

Cmaxx252

Contributor
Jr. Member
Joined
Nov 13, 2023
Messages
73
Loc.
Bakersfield
I modified my beard off road seat frames to land a set of 66 mustang seats. Currently with the seat frame as is, the seat portion is at ~7 degrees. Has anyone modified their stock seats to sit at a more desirable angle (12°-17°)?
To land these at around that I would need to raise the front of the frames up 1.25" or so. Its definitely a more comfortable position. I grabbed measurements off of my 2015 gmc and theyre at 15°.

Curious if anyone else as done this.

Picture of the passenger side. I will do the driver side as well.

seat angle.jpg
 

DirtDonk

Contributor
Bronco Guru
Joined
Nov 3, 2003
Messages
51,651
Have you seen any pictures of the stock seats here or elsewhere on the Internet? Seems like they are already tilted more than yours.
I always thought the aftermarket seats were down too far in the front, but many of them had reclining/adjustable backs anyway so that in itself didn’t become an issue.
But the base always felt weird. The stock seats didn’t seem as bad.
 

73azbronco

Contributor
Bronco Guru
Joined
Nov 11, 2007
Messages
8,782
IMO, seat of pants method. If it's too steep, which it looks like, raise front. How did they sit in mustang body?
 
OP
OP
Cmaxx252

Cmaxx252

Contributor
Jr. Member
Joined
Nov 13, 2023
Messages
73
Loc.
Bakersfield
Have you seen any pictures of the stock seats here or elsewhere on the Internet? Seems like they are already tilted more than yours.
I always thought the aftermarket seats were down too far in the front, but many of them had reclining/adjustable backs anyway so that in itself didn’t become an issue.
But the base always felt weird. The stock seats didn’t seem as bad.
I agree, the pictures ive seen they are more angled. I will go with what feels comfortable in that 12-17 range.
 
OP
OP
Cmaxx252

Cmaxx252

Contributor
Jr. Member
Joined
Nov 13, 2023
Messages
73
Loc.
Bakersfield
IMO, seat of pants method. If it's too steep, which it looks like, raise front. How did they sit in mustang body?
I basically bought a rolling shell and the seats were already out of it in a storage unit. The car is for a different project haha. Bronco first.
 

bigmuddy

Contributor
Bronco Guru
Joined
Dec 28, 2004
Messages
8,071
Loc.
Marthasville Missouri
For me I prefer something flatter in a seat profile. My wife and other that may have longer legs like the front elevated to add support under their knees. I have relatively short legs so..

At any rate, whatever work for you and your drivers is best, no rules here.
 
Top