• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Stock steering column firewall boot

bflippinw

Full Member
Joined
Nov 10, 2011
Messages
244
It seems no one sells the stock metal retaining ring for the firewall boot. Is it necessary or can I just use the new rubber piece? The metal part doesn’t make sense to me anyhow, did the factory use seam sealer underneath it? It looks to me that the metal piece went up against the firewall, seems backwards to me.
 

Attachments

  • C36BCC80-4C1B-4860-88E3-79C6E4A51007.jpeg
    C36BCC80-4C1B-4860-88E3-79C6E4A51007.jpeg
    83.8 KB · Views: 216

Hotrodjohn

Full Member
Joined
Feb 12, 2016
Messages
264
the top hat rubber boot was stapled to that piece of metal and bolted with the four sheet metal screws on the inside pushing the flange of the rubber up against firewall on inside, no seam sealer that Ive ever seen. It looks like yours is still usable. There was a mastic tape type sealant on the triangle support piece on the outside firewall that supports the column .
 

thegreatjustino

Contributor
Red Head Grease Monkey
Joined
Jan 23, 2002
Messages
16,291
Loc.
Stockton, CA
It's a retaining ring for the boot. Holds it in place. While you could screw the rubber boot directly to the firewall and there would likely be minimal movement of the boot itself, what do you think would be easier, the boot tearing and no longer being retained by the four screws or the metal ring failing?
 

73azbronco

Contributor
Bronco Guru
Joined
Nov 11, 2007
Messages
8,782
The book of interiors shows that and it is sealed using a gasket type sealer. Mine had that OEM black gooy stuff, I used clear silicone high heat.
 
OP
OP
B

bflippinw

Full Member
Joined
Nov 10, 2011
Messages
244
Well... stupid me was thinking it bolted on the engine side of the firewall, now I got it.

68... I couldn’t find the metal retainer on Toms website. Got a link?
 

thegreatjustino

Contributor
Red Head Grease Monkey
Joined
Jan 23, 2002
Messages
16,291
Loc.
Stockton, CA

73azbronco

Contributor
Bronco Guru
Joined
Nov 11, 2007
Messages
8,782
Yeah that part doens't look like it has the bend, it goes closest to driver, then rubber boot through firewall screwed in from inside the cab, then bolt up the steering column bracket.
 
Top