• Just a reminder that you won't be able to start new posts or reply to existings posts in the Archive forum.

    This is where all the old posts go so they can still be used for reference and searched.
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

STREEETCH: What is the maximum . . .

How far would you stretch & why?

  • 12" stretch

    Votes: 13 52.0%
  • 16" stretch

    Votes: 5 20.0%
  • 20" stretch

    Votes: 1 4.0%
  • 24" stretch

    Votes: 6 24.0%

  • Total voters
    25

cobralee

Sr. Member
Joined
Jul 6, 2006
Messages
550
Loc.
Northwestern OK
...amount that you would stretch the wheelbase on a bronco? I am trying to put my plans together concerning the buildup of my '68 and I would love to hear some feedback concerning stretches. I'm looking to build an ultimate all around daily driver family wagon. This vehicle will be driven to travel destinations, not towed. I want as much interior room as possible without going to over the top and losing to much off road capability.
 
Last edited:
OP
OP
cobralee

cobralee

Sr. Member
Joined
Jul 6, 2006
Messages
550
Loc.
Northwestern OK
When I ask "why?" I mean for those who have stretched their Broncos.

After stretching were you unhappy? Did you wish you hadn't done the stretch? Or did you wish you had stretched it even further? We're you satisfied even though the new turning capabilities weren't as tight as original or did you decide to do a 4ws conversion?

Thanks
 

broncoitis

Bronco Guru
Joined
Jul 23, 2010
Messages
4,449
Persnally, I haven't stretched one but reading on hear some of the threads where they have, the magic number seems to be in the 100+ inch wheelbase ballpark! :)

I have no doubt that you will get some good feedback from those that have done the stretch. Good Luck with you project! ;D
 

Scoop

Contributor
Bronco Old Fart
Joined
Feb 1, 2006
Messages
11,122
Loc.
Cuchara, CO
Need more info - I think you're talking about stretching the frame and tub, not just the WB? For a family wagon are you looking at gong 4-door? If 4-door, the width of the door should determine the stretch. I'd narrow a door to remove the windwind and have just wide enough to retain the stock window. That would make the stretch about 25 inches. Most 2-door stretches I've seen are around 12 inches. Also, are you planning on installing a 3rd seat?
 
Last edited:

kb6677

Contributor
Bronco Guru
Joined
Jan 19, 2004
Messages
2,178
...amount that you would stretch the wheelbase on a bronco? I am trying to put my plans together concerning the buildup of my '68 and I would love to hear some feedback concerning stretches. I'm looking to build an ultimate all around daily driver family wagon. This vehicle will be driven to travel destinations, not towed. I want as much interior room as possible without going to over the top and losing to much off road capability.

Need more info on your "offroad capability" expectations!!! Reason/example-I am at 106 on the eb, actual leg room in front of the rear seat and room for a large gear box behind the seat-under-tub 20gal. fuel tank, running 40's, beater is 112 also on 40's. Before the eb was retired from trail beatings(before the trails we run got so bad), it had great break over rarely got hung with the 40's. In the last year some of the ledges, climbs/obstacles I have hit with the beater resulted in hanging the rear of the lower links and front of the rear links and the belly pan with a 112 wb and 39.5 Krawlers. So there is a limitation to your original post-NO way you are going to build a "driven/not towed" trail rig, stretched 24+ inches on 40's or less and run hard trails- this of course is subject to your definition of "hard trails". The reason I used 40s in the reply, my 106 eb on 40" MTRs, CAN run on the interstate at 70mph if you want to feed it. Most folks I know in various incarnation of rigs that are longer than 112 run 42-49's and can NOT drive them at interstate speeds on paved roads.
When I win the state lotto, I will be going to the new 42" MTR Goodyear stickys which are 41.25 aired down to 8psi on my beater ranger. For comparison, my buddy's beater is 116wb on 44TSLs and aired down his tires are 41.5"
In conclusion, the 24" that Scoop posted is reasonable for your 4door, running at least a 40" tire for moderate/harder trails(southeast version)-
Let us know what you decide
 

camomog

Full Member
Joined
Sep 10, 2008
Messages
254
Loc.
Reno, Nv.
There are a few of us looking at the 4 door conversion, using partial rear doors and you end up with a stretch around 26". If you are looking at just a stretch of body and frame no added doors most are in the 10 - 14" area, good sorce for the body panel addition is early 60's truck bed sides or a door skin. It just depends on what you are looking for both will keep the four wheel ability and increase on road driving. Both are a fare amount of work, but most have been happy with their streches.
 
OP
OP
cobralee

cobralee

Sr. Member
Joined
Jul 6, 2006
Messages
550
Loc.
Northwestern OK
Idk if I want to do something as complicated as a 4 door conversion at this point in time but I'm still very much up in the air about it. Idk if I have the fab skills to pull that off and I know I certainly lack the funds to pay someone to do it for me. What has been in mind the most is to stretch the tub & frame 18" if I were to stay with a two door setup. Can anybody here give me some info on doing a four door customization? I know Josh did a couple awesome photoshopped versions that I saved to my computer years ago and I really did love the idea of it. I've never owned a four door, our Liberty doesn't count, it's my wifes...I don't care what the title says lmao, but if I did own a four door the Bronco would be the coolest way to go ;D
 
OP
OP
cobralee

cobralee

Sr. Member
Joined
Jul 6, 2006
Messages
550
Loc.
Northwestern OK
Thanks for all the good feedback. I guess you can say I'm looking to build the "ultimate dual purpose dd" possible. I want a rig that the family can load up in & we can drive to our destination.

This photoshopped version is just too sweet. I'm pretty sure this is one that I originally got from Josh. If I went 4 door I'd like to see it look similar to this but with some changes here and there like lift, color, tires, wheels, and other so forths and whatnots here and there.
 

Attachments

  • stretched4door2.jpg
    stretched4door2.jpg
    207.6 KB · Views: 201

kb6677

Contributor
Bronco Guru
Joined
Jan 19, 2004
Messages
2,178
Thanks for all the good feedback. I guess you can say I'm looking to build the "ultimate dual purpose dd" possible. I want a rig that the family can load up in & we can drive to our destination.

OK-cool-do your 24-26 stretch,4 door, OD auto or NV4500, 351W, traditional 5.5 coil, ext. arm eb suspension, run 37" tires and enjoy hauling the fam, looking very cool and running some mild trails-sounds good :)
 
OP
OP
cobralee

cobralee

Sr. Member
Joined
Jul 6, 2006
Messages
550
Loc.
Northwestern OK
sounds like a Bronco buggy will also be in my future....I saw this coming lmao. One can never have to many horses...Broncos, Mustangs, Motorcycles....The more the merrier ;D
 

fungus

Bronco Guru
Joined
May 27, 2009
Messages
1,548
Loc.
Kaneohe Bay, Oahu
Also depends on how big your family is. I've got a family of 6 I'm looking to load up in one rig and get through the Rubicon. Haven't done all the measuring yet on the 2 donor rigs I've got that'll be grafted together but thinking of around a 24" stretch to get a 3rd row of seats in it. Might be less.
 

Tito

CB Fire Starter
Joined
Jan 29, 2006
Messages
10,781
Loc.
Bakersfield, CA
I am still in my planning/brainstorming phase right now as I am still working on my uncut. I would like to do the 4 door with 26" stretch but it won't be quite like the pic above...not that I wouldn't like the look, it's just that the mods for that are endless vs leaving the rear section alone and splicing in the middle and adding striker/posts in the middle.
Some may scoff and this isn't a final determination but I am sizing up the 109" series 2a and 3 land rovers right now possibly instead of the 4 door bronco. I would not be using any of the rover running gear or drivetrain or suspension, just the frame and body with a quad coil suspension and ford components that I already have on the side yard. Still like I said am in the brainstorming phase so it's up in the air till I get the current project finished.
 

camomog

Full Member
Joined
Sep 10, 2008
Messages
254
Loc.
Reno, Nv.
I have emailed Josh some on this and have one of the rear doors done it works out to 27" on my build. The overall wheel base will be 118", a freinds old truck and current buggy are 119" and he loves it and takes it to the hammers and Rubicon. Mine is being built for street trail use, live close to the Rubicon so that is the main playground, that and Fordice. Mine is a little different than what you have described building though. We will be starting the axles after the first of the year, building Mog9's so gearing will be around 5.30 to 1, have a ZF 5 speed and 205 going behind the 351 and looking to run 37 - 40" tires, with linked front and rear so lots of work. The frame stretch is easy the door mod's for a 4 door is easy the hardest will be lining everything up. A body stretch will be a lot easier.

Josh,
My father-in-law has a defender 90 the worst thing is the frames hang down a lot and he gets cought up in the hard stuff fast if he isn't careful.
 

Scoop

Contributor
Bronco Old Fart
Joined
Feb 1, 2006
Messages
11,122
Loc.
Cuchara, CO
I always thought a 4 door halfcab would be cool. Anyone done one?
 

Attachments

  • stretched4door3.jpg
    stretched4door3.jpg
    135.6 KB · Views: 121

Pa PITT

Contributor
Bronco Guru
Joined
Jul 15, 2005
Messages
11,300
Loc.
Stephenville TEXAS
You said you were a little short on fab skills.. So I'm going to say after save your time and save your money .. Swallow real hard and just go buy a jeep unlimited 4 door.. And take your kids out this summer..
...After I did this 4bt swap the time and money it took. I'll never get my time back.
These projects are very cool but there is so much to that project for it to be a good DD & protect the family and complete the trips .
.. While I was working at the Dodge jeep dealership those unlimiteds were nice complete rides.
 

broncoitis

Bronco Guru
Joined
Jul 23, 2010
Messages
4,449
Those 4 door conversions look NICE! I would love to do one of those! It would be a bit tricky with the second doors but definitely possible! ;D

The ultimate DD for the family! :cool:
 
OP
OP
cobralee

cobralee

Sr. Member
Joined
Jul 6, 2006
Messages
550
Loc.
Northwestern OK
I haven't seen a 4dr halfcab yet. The more I think about it the more I want to try and pull off a 4dr wagon. Maybe I can start w/just doing a 24" stretch and then do the second set of doors at a later time.
 
OP
OP
cobralee

cobralee

Sr. Member
Joined
Jul 6, 2006
Messages
550
Loc.
Northwestern OK
...Swallow real hard and just go buy a jeep unlimited 4 door...

That is a wonderful idea and that thought has crossed my mind from time to time but we're getting tired of making high payments. At this point we have decided to get the Cobra paid off & sell her Liberty and get a fuel efficient cheaper car for her. From there we'd just use the remaining budget to go torwards building up our toys. I have taken welding classes and done some minor fab work in the past. My father is an engineer and I feel that if we put our minds together we could tackle a four door build....it may just take us awhile.
 

HGM

Sr. Member
Joined
May 24, 2010
Messages
973
Loc.
Senoia, Ga.
That 4dr looks awesome!!! I may even have to give it some thought... One of these days..

From what I'm seeing and going over what it will take, in my head. I'm thinking it would HAVE TO BE a fixed top. Otherwise, the B-pillars would flex and cause major alignment issues.. I'm wondering, has anyone grafted in an F-150 roof? To go to this extreme, maybe even widening the Bronco would be a good idea.. I know, its a huge concept, but arent they all?;D
 
Top