• Just a reminder that you won't be able to start new posts or reply to existings posts in the Archive forum.

    This is where all the old posts go so they can still be used for reference and searched.
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Stroppe Cactus Smasher Question?

Scoop

Contributor
Bronco Old Fart
Joined
Feb 1, 2006
Messages
11,122
Loc.
Cuchara, CO
I just bought an original Stroppe cactus smasher. From the initial measurements I thought it was for an early Bronco. The seller thought it was for a 78-79 Bronco. Fine I have one of those too! Well got it home and it does not fit an early Bronco, does not fit a 78-79 and does not fit an 80+. The angle of the bottom brackets are wrong and the upper brackets are very high - fits a much wider bumper than any stock Bronco bumper.

Does anyone know what other vehicles Stroppe made cactus smashers for? This is definitely a Stroppe - still has the Stroppe sticker.
 
OP
OP
Scoop

Scoop

Contributor
Bronco Old Fart
Joined
Feb 1, 2006
Messages
11,122
Loc.
Cuchara, CO
Thanks Andy. That helps but does not solve the mystery of mine!

Here's some pics of it.







As you can see it has the 2-bolt flanges on the bottom like an early Bronco cactus smasher but has the curved upper flanges more like one for a 78-79. Neither exactly fit the bolt spacing on any Bronco. The biggest difference however is how high the upper braces are above the lower flanges. Again, it would take a pretty wide (vertical width) bumper for it to fit.

Any ideas?
 

House

Contributor
Minutia Militia
Joined
Aug 12, 2004
Messages
2,440
Will it not fit on a pickup bumper?
 
OP
OP
Scoop

Scoop

Contributor
Bronco Old Fart
Joined
Feb 1, 2006
Messages
11,122
Loc.
Cuchara, CO
Will it not fit on a pickup bumper?

The 78-79 Broncos use the same front clip and bumpers as the pick ups. At least the same as the F100 and F150. Did the F250 and F350 have bigger bumpers?
 

DirtDonk

Contributor
Bronco Guru
Joined
Nov 3, 2003
Messages
51,650
Was thinking the same thing.
The tubing diameter and vetical angles look wrong to me. My first thought was "Hungus" which was another manufacturer, but one that I think had some Stroppe versions for other trucks.
Or one of the Stroppe catalog items for a non-Ford as Scoop was wondering.

Another thought is that it could be for a pre-'73 Ford truck?
The simple fact that the lower brackets don't look flat would tell me it's not for an EB or a Scout, and I don't remember even the full-size Ford bumpers being that curved? Or the Chevy's for that matter.
Just how well/bad does that lower curve match the trucks you've already tried it on?

A mystery. Maybe Andrew will chime in with his take on it.

Paul
 

fordfan

Bronco Guru
Joined
Sep 13, 2009
Messages
3,592
I think this is a later built bar not built by the 'Bill Stroppe and Associates' in Long Beach. The decal which states 'King Off the Road " was a slogan that was used by another company that was making different components for off road vehicles and using the 'Stroppe' name.

I'm not sure what the bar fits, but there's several things that look different to the EB one and the FSB one.
 

sykanr0ng

Bronco Guru
Joined
Aug 11, 2014
Messages
5,363
I think this is a later built bar not built by the 'Bill Stroppe and Associates' in Long Beach. The decal which states 'King Off the Road " was a slogan that was used by another company that was making different components for off road vehicles and using the 'Stroppe' name.

I'm not sure what the bar fits, but there's several things that look different to the EB one and the FSB one.

You can put a decal/sticker from anyone on anything.
 

toddz69

Sponsor/Vendor
Bronco Guru
Joined
Nov 28, 2001
Messages
11,222
The pushbar in the photos isn't for a full size Bronco either - the lower tabs on them were more vertically mounted than the lower ones on the one in the photo (if that makes any sense).

And fordfan is correct - this is likely a later pushbar from Luben Industries (which used the Stroppe name from mid-70s-on). The "King Off the Road" moniker was one of theirs.

Here's a scan of one of their catalogs from '76 or '77 that shows all the "Cactus Smasher" applications available. And yes, a Blazer is listed.

Todd Z.
 

Attachments

  • Cactus Smasher.jpg
    Cactus Smasher.jpg
    57.8 KB · Views: 127
OP
OP
Scoop

Scoop

Contributor
Bronco Old Fart
Joined
Feb 1, 2006
Messages
11,122
Loc.
Cuchara, CO
Todd, Dennis, thanks! There are a lot more "Stroppe" applications than I was aware. So now I'm guessing this is for a Blazer/Jimmy. This particular cactus smasher was purchased used 30 or so years ago by the seller's father, so the story goes. The father owned full size Broncos and a few Blazers over the years. The father never installed it and it was hung on his shop's wall since he purchased it. The son is now selling off parts and other project vehicles to finance the restoration of his 70 Mach I. Interesting info on Luben Industries.

So I guess this cactus smasher will now decorate my shop wall for years to come! LOL %)

Thanks for everyone's input in clearing this up.
 

BajaBronco

Contributor
Bronco Guru
Joined
Apr 30, 2003
Messages
4,101
Cool piece! Glad you saved it- I have one here for a Dodge I think - same situation.... Sorry so late to the thread.
 

DirtDonk

Contributor
Bronco Guru
Joined
Nov 3, 2003
Messages
51,650
Sounds like what Scoop's PO's dad ran into. Couldn't get it to fit the Bronco, so just hung it on the wall like all good shade tree garage mechanics!

Now to choose just the right items to "accessorize" it on the wall.;D
Old Marchal or Lucas lights? Vintage oil cans? An old license plate or two would work too.
Have fun!

Paul
 

BajaBronco

Contributor
Bronco Guru
Joined
Apr 30, 2003
Messages
4,101
Yeah, throw some KCs or something. Thats the vintage. I will say this about the find.

Luben Industries, later Hungus products starting around 76 in earnest. After STroppe was edged out. Thats when the line expanded to include all those other brands. The only thing Stroppe added before the switch were Courier and F series truck pieces, and only a handful really. So the Stroppe stuff thats associated with Broncos(up to 74-5), really is not from that era.... a different company , using Stroppes name, business, etc, via an unwelcome take-over.
 
OP
OP
Scoop

Scoop

Contributor
Bronco Old Fart
Joined
Feb 1, 2006
Messages
11,122
Loc.
Cuchara, CO
Adding vintage lights is an awesome idea. This may end up costing me more money!!

Didn't know that about Luben - the hostile takeover part. Maybe not a bright spot in Stroppe history, but still part of the lore.
 

mp

Bronco Guru
Joined
Dec 22, 2001
Messages
2,921
Loc.
Austin, TX
Ha. I had emailed that guy, but he wanted too much for it without knowing exactly what it fit. I was hoping it was for a 78-79 Bronco, but sounds like a no go.
 

half cab

Contributor
Guru Bronco
Joined
Dec 8, 2010
Messages
16,311
Stroppe worked with Jeeps also in the late 70's and early 80's to I believe.
 

coachbarnes

Bronco Guru
Joined
Aug 3, 2001
Messages
2,717
Loc.
Franktown/Breck, CO
The pushbar in the photos isn't for a full size Bronco either - the lower tabs on them were more vertically mounted than the lower ones on the one in the photo (if that makes any sense).

And fordfan is correct - this is likely a later pushbar from Luben Industries (which used the Stroppe name from mid-70s-on). The "King Off the Road" moniker was one of theirs.

Here's a scan of one of their catalogs from '76 or '77 that shows all the "Cactus Smasher" applications available. And yes, a Blazer is listed.

Todd Z.

Do you have that Stroppe catalog?
 

toddz69

Sponsor/Vendor
Bronco Guru
Joined
Nov 28, 2001
Messages
11,222
I do.

Review at some point when we can get together?

Todd Z.
 
Top