Just a reminder that you won't be able to start new posts or reply to existings posts in the Archive forum.
This is where all the old posts go so they can still be used for reference and searched.
Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
If you have problems registering or can't log into your account, please contact Admin.
Does a Dana 300 bolt up to a C4 in place of the Dana 20? If not, how difficult is the swap? I found a good deal on a Dana 300 with a 4 to 1 Terra Low set installed. I can't find much info on a Dana 300 and Bronco's.
Shouldnt be to much of a problem although I'm not sure about which side the D300 hangs down on passenger side? VS bronco drivers side. I believe they can be clocked but then you may have to come up with some funky shift linkages. as for adapters go to http://www.advanceadapters.com/newidea.html they have a c4 to 300 adapter