• Just a reminder that you won't be able to start new posts or reply to existings posts in the Archive forum.

    This is where all the old posts go so they can still be used for reference and searched.
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

tabs for windshield/rollbar turnbuckle

brian72

Early Bronco Student
Joined
Jun 18, 2001
Messages
4,157
Can I find something that will work locally as a tab that I can weld to the rollbar and drill my hole for the turnbuckle that will stabilize my windshield?

If not locally...can someone cut me two tabs? PM me

brian
 

Flash69

Bronco Guru
Joined
Jul 21, 2004
Messages
2,429
Loc.
Southwest Va
I drilled a hole and tapped it for a 5/16 bolt in the side of my cage next to the windshield. It works good so far.
 

SaddleUp

Bronco Guru
Joined
May 23, 2004
Messages
9,655
Loc.
Vancouver, WA
x4, I just drilled/tapped a hole in the bottom of my rollcage bar that runs above the windshield and used 2 turnbuckles. Been that way for about 2 1/2 years now.
 

crab

Bronco Guru
Joined
Feb 23, 2004
Messages
2,268
We have welded in "weld nuts" on a few of our cages but is a bit of an over kill. I will be X5 as far as drilling and tapping. I just drilled the hole and used a stainless steel self tapping metal screw. I bought the heims from NAPA for around $5 each which accept 5/16" X 18 all thread and standard 5/16" fine thread jam nuts (not in pic)
Crab
 

Attachments

  • IMG_0636.JPG
    IMG_0636.JPG
    60.6 KB · Views: 270

Cooter_76

Sr. Member
Joined
May 18, 2004
Messages
863
x6 for the drill & tap. My Harbor Freight tap set didn't fare too well, though. :(
 

scottmcwms

Sr. Member
Joined
Jul 19, 2005
Messages
858
Loc.
Montgomery, TX
Cooter_76 said:
x6 for the drill & tap. My Harbor Freight tap set didn't fare too well, though. :(

Yeah, my HF tap set is really only good for tapping or die chasing existing threads. It will definitely carve through aluminum though!
 

Skiddy

Bronco Guru
Joined
Oct 8, 2003
Messages
11,587
I guess I will X7 used a piece on 1/4x1 flat bar but I didn't tap the holes in the cage just drilled a hole and used a self drilling tapping screw. Works good.
 

rcmbronc

Contributor
Bronco Guru
Joined
Dec 15, 2003
Messages
2,778
Loc.
Tomah WI
I drilled and tapped it. I did it in fine thread in order to get more threads. It will hold fine for this application. If not go to somewhere like Fastenal and get some weldnuts.
 

Flash69

Bronco Guru
Joined
Jul 21, 2004
Messages
2,429
Loc.
Southwest Va
Cooter_76 said:
x6 for the drill & tap. My Harbor Freight tap set didn't fare too well, though. :(
DOM tubing is pretty hard. I have a good set of taps. I dont remember what brand they are. They have survived several holes.
 

ET

Contributor
Bronco Guru
Joined
Jun 14, 2001
Messages
1,800
Loc.
Dallas, TX
I guess I'm the only one that didn't drill and tap the mount. I can't drill worth crap and don't have a die set so I did the non mechanic way. I bought some ubolts at hardware store and clamped it down the roll bar, this way<U>. Then slipped the eye's through the front bolt. It's doesn't look good but gets the job done.

Eugene
 
Top