• Just a reminder that you won't be able to start new posts or reply to existings posts in the Archive forum.

    This is where all the old posts go so they can still be used for reference and searched.
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Tail Light bulb?

NYC Bronco

Full Member
Joined
Feb 21, 2017
Messages
169
I was driving home to my garage yesterday a passerby told me my taillight/brake light was not functioning. I figured something was up as the turn signal indicator was solid and not flashing.

Before I go my garage (I live in NYC, it's not in my residence) I was wondering if anyone knew the Bulb part #?

Bronco: 1976 U-15 Wagon, original tail light set up.

Will Sylvania 1157 or 1157R's fit into the original sockets?
 

hankjr

Contributor
Bronco Guru
Joined
May 11, 2013
Messages
1,761
Howdy. 1157 is the replacement bulb type and the pin/base configuration is standard. R versions also fit as do LED retrofits. clear bulb is drop in/stock. colored versions wont give you as much light.

Hank
 

B RON CO

Contributor
Bronco Guru
Joined
Jun 29, 2016
Messages
2,484
Loc.
Statesville, NC
Hi, X2 there are 4 1157 bulbs, 2 in the front, and 2 in the back. I keep some extras in the tool box. Good luck
 

sykanr0ng

Bronco Guru
Joined
Aug 11, 2014
Messages
5,363
Howdy. 1157 is the replacement bulb type and the pin/base configuration is standard. R versions also fit as do LED retrofits. clear bulb is drop in/stock. colored versions wont give you as much light.

Hank

Not entirely true.
Red lenses filter out all but the red light, so red output LED bulbs will give more usable light than white ones for this application.
 

hankjr

Contributor
Bronco Guru
Joined
May 11, 2013
Messages
1,761
Not entirely true.
Red lenses filter out all but the red light, so red output LED bulbs will give more usable light than white ones for this application.

In a pure transmission sense perhaps, but led color and lens color would have to be in nearly the same wavelength/xy coordinates to fully realize that efficiency. Color specifications are barn door ish in size relatively speaking, assuming the bulb even meets the spec. LED binning is precise, but not necessarily aligned with lens color. However imported, coated bulbs are of notoriously poor quality and rarely in spec. This is what I was intending on my earlier statement

Hank
 

cldonley

Contributor
Bronco Guru
Joined
Jul 4, 2011
Messages
1,398
Loc.
Robinson, TX
In a pure transmission sense perhaps, but led color and lens color would have to be in nearly the same wavelength/xy coordinates to fully realize that efficiency. Color specifications are barn door ish in size relatively speaking, assuming the bulb even meets the spec. LED binning is precise, but not necessarily aligned with lens color. However imported, coated bulbs are of notoriously poor quality and rarely in spec. This is what I was intending on my earlier statement

Hank

What? ?:? Can you say that in redneck?
 
OP
OP
N

NYC Bronco

Full Member
Joined
Feb 21, 2017
Messages
169
Update: my OEM lighting only has one contact and that means bulbs with one filament, the 1157 has two and does not work, the correct bulb seems to be a 1156.

there is a top bulb that appears to be the turn signal bulb and a lower bulb that is the brake light. My upper bulb was blown badly, not broken but burnt out and blackened on the inside. I suspect there was some scoring and corrosion in the socket as the bulb broke off and left the bulb end in the socket, I then destroyed this while trying to remove it from the socket, crushing the housing into the socket before finally being able to remove it. now a new bulb in place. the new bulbs filament barely glows, not sure what the issue there is what my recourse is.

the lower bulb lights up great. Here is the funny thing....hit the turn signal and the front indicator and the headlight halo "blink", the tail light isn't....but the license plate light does! I'm baffled. Might have to break down and let a real mechanic look at it.
 

Scoop

Contributor
Bronco Old Fart
Joined
Feb 1, 2006
Messages
11,121
Loc.
Cuchara, CO
Something's not quite right! In a stock configuration 67 and up, the top bulb should be an 1157 with 2 contacts - one for tail lights and one for brake lights/turn signals. The lower bulb will be a single element bulb for your back up lights.
 

bronconut73

Bronco Guru
Joined
Aug 7, 2012
Messages
9,919
something's not quite right! In a stock configuration 67 and up, the top bulb should be an 1157 with 2 contacts - one for tail lights and one for brake lights/turn signals. The lower bulb will be a single element bulb for your back up lights.



this /\/\/\/\
 

B RON CO

Contributor
Bronco Guru
Joined
Jun 29, 2016
Messages
2,484
Loc.
Statesville, NC
Hi, 1156 is a one post bulb. It is for your white back up light, the bottom socket. You should go over the wiring with a test light. Back up, bottom socket hot. Tail lamp, full time into top socket, flasher, brake, directional, part time into socket, use the flasher or directional to test for current. Of course the brake light should be brighter. All wise @#$ comments aside, I just use clear bulbs. Good luck
 
OP
OP
N

NYC Bronco

Full Member
Joined
Feb 21, 2017
Messages
169
Something's not quite right! In a stock configuration 67 and up, the top bulb should be an 1157 with 2 contacts - one for tail lights and one for brake lights/turn signals. The lower bulb will be a single element bulb for your back up lights.

I will double check that, could be.
 

sykanr0ng

Bronco Guru
Joined
Aug 11, 2014
Messages
5,363
Someone has 're-wired' it and put the wrong pigtails / sockets in the taillight buckets.
Previous owners what would we do without them? %)
 
Top