• Just a reminder that you won't be able to start new posts or reply to existings posts in the Archive forum.

    This is where all the old posts go so they can still be used for reference and searched.
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Things you will never do again to your Bronco!

OP
OP
Evian

Evian

Full Member
Joined
Jan 17, 2010
Messages
319
Loc.
Algonquin/IL
Putting my Bronco key ring with all my other key rings forming a huge heavy key ring that causes problems with my wipers, heater and turnsignal. I had such a heavy key ring that my heater, wipers, and turnsignal refused to work. The weight was pulling the switch too far to the right. I spent hours trying to figure out what was wrong. The moment I touched the key ring everything turned on. This goes to show you sometimes it is the stupidous things that cause the biggest headaches.
 

mavereq

Bronco Guru
Joined
Feb 19, 2009
Messages
2,092
tearing it apart before picking up another frame anyways. i could have been driving it the whole time i was building the other frame.
 

Kurt

Sr. Member
Joined
Nov 10, 2001
Messages
555
Loc.
Badger State
tearing it apart before picking up another frame anyways. i could have been driving it the whole time i was building the other frame.

I am keeping that in mind with my trail rig. I would like to build another rolling chassis on a bare frame, then swap the body over. I am waiting until after next year's final wheeling trip to do the swap.

My regret is leaving my 'glass EB in pieces, so I don't have one to drive around.
 

Attachments

  • Fall Run.jpg
    Fall Run.jpg
    134.6 KB · Views: 63
Top