• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Third times a charm v3.0

OP
OP
JSmall

JSmall

Bronco Guru
Joined
Feb 18, 2004
Messages
3,224
Here's a few shots of the rear with the axle moved back. Not much flex using lift blocks, but no rubbing.

DSC01094_zps8b4acdd1.jpg


DSC01095_zps7ca7223c.jpg
 
OP
OP
JSmall

JSmall

Bronco Guru
Joined
Feb 18, 2004
Messages
3,224
Fixture for the bumper build is finished. Wasn't necessary, but it will help fitting it up and welding. My buddy had a mill handy so it was easy



 

miikee73

Shadetree Guru
Joined
Dec 14, 2010
Messages
3,551
Loc.
Aloha
The bumper will probably be the straightest thing on the Bronco. Factory never put out that much effort.
 
OP
OP
JSmall

JSmall

Bronco Guru
Joined
Feb 18, 2004
Messages
3,224
The bumper will probably be the straightest thing on the Bronco. Factory never put out that much effort.

You are probably right Mike. I'm sure I could have got it real close without the fixture.
 

bsquared

Contributor
Sr. Member
Joined
Dec 4, 2010
Messages
972
Man,
Wish I had a friend with a mill! My set gets here in about a week, sans the cool jig there. Please post progress and good luck. Hope my welding gets a lot better real soon. ;D

Cheers, B2
 
OP
OP
JSmall

JSmall

Bronco Guru
Joined
Feb 18, 2004
Messages
3,224
Man,
Wish I had a friend with a mill! My set gets here in about a week, sans the cool jig there. Please post progress and good luck. Hope my welding gets a lot better real soon. ;D

Cheers, B2


Steve is now offering a jig. Might want to give him a call. I should be welding mine up on Friday.
 

bsquared

Contributor
Sr. Member
Joined
Dec 4, 2010
Messages
972
Man, please post progress, I'll be tracking it! Yes, Steve is sending the jig to me as a favor! (thanks Steve) I may have to upgrade welders, as the 140 I have ain't gettin it done.
Good luck and that's a nice Bronco you have there. Wire burning awaits you!

Cheers, B2
 
OP
OP
JSmall

JSmall

Bronco Guru
Joined
Feb 18, 2004
Messages
3,224
Had an extra 30 minutes today so I worked on the bumper. Got the receiver section welded together.

 

gritz

Sr. Member
Joined
Jun 27, 2007
Messages
473
That is cool I was just thinking today that you hadnt posted anything for a while.
 
OP
OP
JSmall

JSmall

Bronco Guru
Joined
Feb 18, 2004
Messages
3,224
That is cool I was just thinking today that you hadnt posted anything for a while.

Well it's about Damn Time.....Lookin Good!

I know, I've been busy with work and planning my next purchase/toy. I'll probably work on it a little tomorrow. I'll be starting the tranny swap next week, but it will be slow going as well.
 
OP
OP
JSmall

JSmall

Bronco Guru
Joined
Feb 18, 2004
Messages
3,224
Planning new purchase? Another bronco? Cut?

Getting back into sand sports. I regret selling my quads a few years ago. I'm going to get Erica another 450 and I'm going to build a 2 seat mini rail powered by a 1000cc street bike motor :)
 
OP
OP
JSmall

JSmall

Bronco Guru
Joined
Feb 18, 2004
Messages
3,224
Removed the transmission and transfer case today. I have some serious cleanup to do.

DSC01185_zps75f05a42.jpg


DSC01192_zpsbe64dd59.jpg


DSC01193_zps82713201.jpg
 
Top