• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Third times a charm v3.0

OP
OP
JSmall

JSmall

Bronco Guru
Joined
Feb 18, 2004
Messages
3,224
I decided to pull the motor while I was at it.

E021E19B-0760-456B-96DD-E5941F94A079_zpsqpmipnjf.jpg
 

gritz

Sr. Member
Joined
Jun 27, 2007
Messages
473
Better watch it you will wind up doing a frame off. How is the bumper coming along?
 

miikee73

Shadetree Guru
Joined
Dec 14, 2010
Messages
3,551
Loc.
Aloha
I was glad to help you clear the floor of trip hazards. You pulled a motor and I pulled a trans....Out of the back of the Bronco and sat it on the floor.....Thanks again..
 
OP
OP
JSmall

JSmall

Bronco Guru
Joined
Feb 18, 2004
Messages
3,224
I was glad to help you clear the floor of trip hazards. You pulled a motor and I pulled a trans....Out of the back of the Bronco and sat it on the floor.....Thanks again..

;D You were a big help. Always fun to chat with follow Bronco brothers.
 
OP
OP
JSmall

JSmall

Bronco Guru
Joined
Feb 18, 2004
Messages
3,224
Better watch it you will wind up doing a frame off. How is the bumper coming along?

I fight that urge all the time ;D

I haven't put any work into the bumper lately. Focusing on other things at the moment.
 

miikee73

Shadetree Guru
Joined
Dec 14, 2010
Messages
3,551
Loc.
Aloha
Looks like your making good progress. don't forget the before and after pics of the engine compartment. Your spud shaft is out and ready. That's as far as my project has gone.
 
OP
OP
JSmall

JSmall

Bronco Guru
Joined
Feb 18, 2004
Messages
3,224
Looks like your making good progress. don't forget the before and after pics of the engine compartment. Your spud shaft is out and ready. That's as far as my project has gone.

Here's a before pic. Still not sure how far I want to go with it. I can clean things up and rattle can it or I can remove everything and take it to a shop for paint. I'll probably just rattle can because I'm not going to get into bodywork right now.

Thanks for pulling that. I'll pick it up one of these days soon.

DSC01201_zpsa08ad5aa.jpg
 
OP
OP
JSmall

JSmall

Bronco Guru
Joined
Feb 18, 2004
Messages
3,224
Thanks! This is just a temp solution until I'm ready to start the bodywork. Looks good for now.
 
OP
OP
JSmall

JSmall

Bronco Guru
Joined
Feb 18, 2004
Messages
3,224
Finally making some progress.

Transfer case rebuild while I wait for the machine shop to finish my engine.

DSC01381_zpsca3b9b8f.jpg


Few parts arrived. WH shorty headers and the Lock and Load security console that GregB designed.

DSC01382_zps5a969390.jpg

DSC01378_zps5dd44cf8.jpg


Filling the over-sized hole where the 3 speed once lived. Little more trimming and it will fit perfect. I should be tacking it in tomorrow.

DSC01377_zpsf7c9f3cc.jpg
 

BronCowie

Contributor
Old Timer
Joined
Apr 24, 2007
Messages
8,290
Loc.
Vancouver, WA
Finally making some progress.

Transfer case rebuild while I wait for the machine shop to finish my engine.

I'm not going to recognize your bronco next time I see it Jaromy... damn you are getting after it! What machine shop is your engine in?



 
OP
OP
JSmall

JSmall

Bronco Guru
Joined
Feb 18, 2004
Messages
3,224
I'm not going to recognize your bronco next time I see it Jaromy... damn you are getting after it! What machine shop is your engine in?

Thanks Mark! That was the first outing in the Bronco...great time! It has come a long ways since then.

I took it to the Napa in McMinnville. The machinist looked everything over and said it looked great so he is doing some minor work to it and replacing the oil galley plug that fell out. I was hoping to have it back yesterday.
 
OP
OP
JSmall

JSmall

Bronco Guru
Joined
Feb 18, 2004
Messages
3,224
So the machine shop had the engine longer than expected, but they ended up replacing the bearings, oil galley plugs, timing set and gaskets. I'm in the process of cleaning and painting everything else.
 

Attachments

  • 20140825.jpg
    20140825.jpg
    101.1 KB · Views: 275
  • 20140825_1.jpg
    20140825_1.jpg
    105.9 KB · Views: 260
Top