• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Third times a charm v3.0

OP
OP
JSmall

JSmall

Bronco Guru
Joined
Feb 18, 2004
Messages
3,224
How many kids will get to show off a baby pic like that!!! :cool:

I feel so blessed that I get to share this with him. One more for now

58b64c9b00907bd2cd51f728d339118e_zpse61a3427.jpg
 
OP
OP
JSmall

JSmall

Bronco Guru
Joined
Feb 18, 2004
Messages
3,224
Hanson bumper going on. I'm having a few issues with the brackets, but those are being worked out with Hanson right now.

58310D93-6F14-4C9A-A5BA-7BC891FF431C_zpsdwkodkdj.jpg


This is what I started with. Full width, high pinion Dana 44 and 9 inch out of a 1976 F-150. Cut all the brackets off and cleaned them up for the link brackets and truss

E0C317CF-9B5A-469F-90CB-B500987AFB4D_zps1xi9erqu.jpg


8FDB7F82-A0DC-458C-AD5C-739174763A2E_zpstpbyfn1a.jpg


Went out and played in the rocks last weekend with Bronckrawler and a few other guys. Most of the pics and vids are on Facebook.

0A267277-A3C0-4BB5-BCAD-F24895370400_zpsspxgpmi3.jpg

59B3726B-A68B-44B5-B489-DC3AAE4A62BF_zpsjnu8c8wt.jpg

E72A9AF5-8CD9-45C5-90AF-3B0D3608FF7E_zpssdw5gdsj.jpg

94FA4503-3ACF-4A06-B895-3217FF7C97D9_zpsw1ozexdr.jpg
 

jmhend

Bronco Guru
Joined
Dec 25, 2007
Messages
2,768
Unfortunately (for me) Jaromy has MY bumper...which is why it has a script. I figured I could wait to build mine again :(

Steve has always been the great guy giving his stuff away to folks that need it. Amazing guy in my eyes.

Jason
 
OP
OP
JSmall

JSmall

Bronco Guru
Joined
Feb 18, 2004
Messages
3,224
Picked up the next project today. Ordered an ARB manifold and some switches from OTRATTW so I will have lots of wiring to do soon.

 

miikee73

Shadetree Guru
Joined
Dec 14, 2010
Messages
3,551
Loc.
Aloha
Are these ARB's going in full widths or have we had yet another change in course. There's a camp out on the mountain at Dave's place on May 30-31,any chance you can make it?
 
OP
OP
JSmall

JSmall

Bronco Guru
Joined
Feb 18, 2004
Messages
3,224
Are these ARB's going in full widths or have we had yet another change in course. There's a camp out on the mountain at Dave's place on May 30-31,any chance you can make it?

I don't have the lockers yet so I'm going to wire up the compressor for now and add the switches and wiring to my dash so the wiring is ready when I have the axles under the Bronco. Still going full width :)

I don't believe I have anything going on those days...let me check with Erica. I would love to go and my Bronco will be ready for sure.
 
OP
OP
JSmall

JSmall

Bronco Guru
Joined
Feb 18, 2004
Messages
3,224
I'm planning out some wiring right now, but that shouldn't stop me from driving it out to Dave's. Need to find some room for the Volvo relay pack, headlight relays and horn relay. Trying to make it as clean as possible.

Then I need to run some wires in the cab for the accessory switches, USB ports, 12v power port and amp. Planning it out is the hardest ;D
 

Crawdad

Bronco Guru
Joined
Feb 16, 2011
Messages
3,635
Full widths and uncut fenders huh?!!! Could get very interesting! Good luck!
 
OP
OP
JSmall

JSmall

Bronco Guru
Joined
Feb 18, 2004
Messages
3,224
3-link front and 4-link rear with Johnny Joints, Artec brackets and trusses, and ORI struts. That's the plan right now. I'm building a rear axle now and when I'm finished, I will start on the front axle. When those are done, I will start the swap.
 
Top