• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Third times a charm v3.0

badmuttstang

redneck grease monkey
Joined
Oct 25, 2009
Messages
2,807
Oh no here we go your going to post pics and hear how you should weld it back together;D
Now make sure you take a pic with your head sticking up thru that hole...... Hehehe;)
That should get everyone wondering
 

miikee73

Shadetree Guru
Joined
Dec 14, 2010
Messages
3,551
Loc.
Aloha
Actually Jaromy didn't cut his Bronco..... John did! I was just a spectator ,chanting in the background,,,Cut,cut,cut.
 
OP
OP
JSmall

JSmall

Bronco Guru
Joined
Feb 18, 2004
Messages
3,224
Actually Jaromy didn't cut his Bronco..... John did! I was just a spectator ,chanting in the background,,,Cut,cut,cut.

It's a good feeling now that it's over with. Thanks again for coming out and providing some support.
 
OP
OP
JSmall

JSmall

Bronco Guru
Joined
Feb 18, 2004
Messages
3,224
B3377DA3-F503-412A-919A-D9562AEC7A3C_zpsjyxhc1vb.jpg
 
OP
OP
JSmall

JSmall

Bronco Guru
Joined
Feb 18, 2004
Messages
3,224
Wow, we won't recognize it! Won't be able to see it in action either, unless I wear hiking boots and run down the trail :)

You're talking about v2.1 :) Atlas, 5.0 Explorer motor, 4r70w trans...

This is where I'm at right now -





 
OP
OP
JSmall

JSmall

Bronco Guru
Joined
Feb 18, 2004
Messages
3,224
Oh my I think i'm having a heart attack! JK Looks good for a cut bronco, really cut bronco!

Thanks! I had to cut the inner wheel well because it was in the way now that I pushed the axle back. I will be filling that back in soon.
 

badmuttstang

redneck grease monkey
Joined
Oct 25, 2009
Messages
2,807
It's going to be a beast but I thought we agreed the inside was going to be left open so you could get in and out of the back easier!;D
 
OP
OP
JSmall

JSmall

Bronco Guru
Joined
Feb 18, 2004
Messages
3,224
It's going to be a beast but I thought we agreed the inside was going to be left open so you could get in and out of the back easier!;D

I cut a little more out of the tub so that should be possible. Now to find someone willing to try :eek:
 
OP
OP
JSmall

JSmall

Bronco Guru
Joined
Feb 18, 2004
Messages
3,224
Didn't amount to much, but I made a little progress today. The lower strut mounts are ready to be burned in after I get the final location of the towers in place. im going to redo the gussets to come up with something a little better looking.







I will use a 2" spacer between the frame and tower so it doesn't go into the bed too far. I need to run a back seat.

 
OP
OP
JSmall

JSmall

Bronco Guru
Joined
Feb 18, 2004
Messages
3,224
Coming along. They will clear the seat which is very important. I hope to have them burned in this weekend.





 
Top