• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Third times a charm v3.0

OP
OP
JSmall

JSmall

Bronco Guru
Joined
Feb 18, 2004
Messages
3,224
Won't you have to shorten up your towers?

I will. It will give me more room in the engine bay so not all is lost. I have to cut up all the progress I made on them so that's not easy.
 

Yeller

Contributor
Bronco Guru
Joined
Mar 27, 2012
Messages
7,692
Loc.
Rogers County Oklahoma
It just dawned on me that your using a 44 in the front.... I'd of been more helpful a while ago if I had realized it, been a long time since I worked with a 44, the "c" brackets don't work well unless your running 3-1/2" back space wheels that are 10" wide or more. sorry, my bad for not assembling all the details in my head.... but it looks REALLY GOOOD!
 
OP
OP
JSmall

JSmall

Bronco Guru
Joined
Feb 18, 2004
Messages
3,224
It just dawned on me that your using a 44 in the front.... I'd of been more helpful a while ago if I had realized it, been a long time since I worked with a 44, the "c" brackets don't work well unless your running 3-1/2" back space wheels that are 10" wide or more. sorry, my bad for not assembling all the details in my head.... but it looks REALLY GOOOD!

No Problem Steve, you have been a big help through this process.
 
OP
OP
JSmall

JSmall

Bronco Guru
Joined
Feb 18, 2004
Messages
3,224
Whats the word? Still on track for Round Up!?

I'm not sure if the Bronco will make the Roundup. I will be there with or without it.


I started on the engine cage awhile ago and finally got both sides on. I still have a lot more tube to add before I'm finished.

0E774282-F733-47A5-A503-601FA11154FF_zpshl2ctkmu.jpg


FA235097-FBE8-4DA0-A394-071B200066B9_zpsxq8z7evs.jpg


50E16053-6ECE-40A0-8222-DE26DDB3A710_zpsqj0bqgpg.jpg


The front axle has the 5.13's and ARB installed now. I should have the axle finished up and the Bronco on the ground soon.

DCD8E554-A41A-442B-8004-8DCF71AC33E7_zpsitxspui4.jpg
 

NYLES

Bronco Guru
Joined
Aug 13, 2004
Messages
9,846
It just dawned on me that your using a 44 in the front.... I'd of been more helpful a while ago if I had realized it, been a long time since I worked with a 44, the "c" brackets don't work well unless your running 3-1/2" back space wheels that are 10" wide or more. sorry, my bad for not assembling all the details in my head.... but it looks REALLY GOOOD!

This is what happens when you ride the short bus...........All I can say with ALL due respect is that YA'LL in way way way over my head!!!

NICE work!
 
OP
OP
JSmall

JSmall

Bronco Guru
Joined
Feb 18, 2004
Messages
3,224
This is what happens when you ride the short bus...........All I can say with ALL due respect is that YA'LL in way way way over my head!!!

NICE work!

I feel like I'm in over my head most days :eek:
 

NYLES

Bronco Guru
Joined
Aug 13, 2004
Messages
9,846
I'm sitting thinking about tubing my front clip while is half off! Thinkin real real simple 1.5 square tube, just something to hold fenders and grill and let the air flow. Waiting on parts for other rolled it issues, gonna raise my other rear hanger today! and keep tinkerin till Sept.
 
OP
OP
JSmall

JSmall

Bronco Guru
Joined
Feb 18, 2004
Messages
3,224
I'm sitting thinking about tubing my front clip while is half off! Thinkin real real simple 1.5 square tube, just something to hold fenders and grill and let the air flow. Waiting on parts for other rolled it issues, gonna raise my other rear hanger today! and keep tinkerin till Sept.

Simple would have got this done quicker. My brother and I wanted to see what we could come up with using BendTech Pro. After this is finished the family cage design should be easier.
 

Yeller

Contributor
Bronco Guru
Joined
Mar 27, 2012
Messages
7,692
Loc.
Rogers County Oklahoma
The tube work looks great! I've got bend tech pro and have never used it for anything than 2D parts, I look at it, get frustrated, and go draw it on the floor measure out the angles in X Y and Z, calculate the radius takeouts, then transfer it to the tube. Learning the software would probably be faster....LOL but doing it old school is slow, methodical and good therapy for my brain. messing with the software makes me want to get out a hammer:p

Maybe that's why I get accused of the short bus....LOL




also remember, bent tube is sexy to look at, Miters are stronger than the tube itself.
 
OP
OP
JSmall

JSmall

Bronco Guru
Joined
Feb 18, 2004
Messages
3,224
The tube work looks great! I've got bend tech pro and have never used it for anything than 2D parts, I look at it, get frustrated, and go draw it on the floor measure out the angles in X Y and Z, calculate the radius takeouts, then transfer it to the tube. Learning the software would probably be faster....LOL but doing it old school is slow, methodical and good therapy for my brain. messing with the software makes me want to get out a hammer:p

Maybe that's why I get accused of the short bus....LOL




also remember, bent tube is sexy to look at, Miters are stronger than the tube itself.

My brother uses the software for the most part. I understand it, but I usually only help with the measuring. That can get tricky when using the pick points in the software. The SW really helps when doing an assembly because it prints all of the notching templates.
 

BanditBronco

Sr. Member
Joined
Jul 2, 2008
Messages
690
Bummer I was hoping to check out your rig at the round up, I am envious. Don't rush it though I know how that goes!
 
OP
OP
JSmall

JSmall

Bronco Guru
Joined
Feb 18, 2004
Messages
3,224
Bummer I was hoping to check out your rig at the round up, I am envious. Don't rush it though I know how that goes!

I'm really going to try to have it there. I just can't bring myself to cut any corners to get it done.
 
Top