• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Third times a charm v3.0

Dusty

Bronco Guru
Joined
Jun 28, 2001
Messages
2,969
Metal was made to be cut;D

I agree with this! For years I've rolled my eyes whenever someone gets on someone else for cutting up THEIR Bronco. You build it the way you want it. And if for some reason at a later date you or a subsequent owner wants to take it back to un-cut, there are parts available to do that. Its not the end of the world to cut an un-cut Bronco.
 
OP
OP
JSmall

JSmall

Bronco Guru
Joined
Feb 18, 2004
Messages
3,224
Thanks Steve and Dusty! I understand why some question what I did, but in the end, it's my vision and my money.
 

miikee73

Shadetree Guru
Joined
Dec 14, 2010
Messages
3,551
Loc.
Aloha
Thanks Steve and Dusty! I understand why some question what I did, but in the end, it's my vision and my money.

You know I've been behind you from the get-go. Hell you had full width axle's before you had the Bronco. I'm surprised it took so long ,but also am surprised at the scope of the build and the transformation into a Bad Ass ride.

I've had a full plate for a while and am having trouble just thinking about getting ready for NWBR ,let alone building a Bronco,raising a terrific son,with a good mom and setting up your new digs. Hang in there.
 
OP
OP
JSmall

JSmall

Bronco Guru
Joined
Feb 18, 2004
Messages
3,224
You know I've been behind you from the get-go. Hell you had full width axle's before you had the Bronco. I'm surprised it took so long ,but also am surprised at the scope of the build and the transformation into a Bad Ass ride.

I've had a full plate for a while and am having trouble just thinking about getting ready for NWBR ,let alone building a Bronco,raising a terrific son,with a good mom and setting up your new digs. Hang in there.

Thanks Mike! That means a lot to me. We have been very busy lately, but we have also come a long way in a short amount of time.
 
OP
OP
JSmall

JSmall

Bronco Guru
Joined
Feb 18, 2004
Messages
3,224
Nothing new on the Bronco lately, but my son is still getting his fix in. I must be doing something right ;D

107FA366-10DB-4051-8401-0AFA3BEEC73D_zpsi3tyymi4.jpg


7A9BD293-B193-44D5-B5EC-AB38D2A5EA5B_zpsptmfhbmu.jpg
 
OP
OP
JSmall

JSmall

Bronco Guru
Joined
Feb 18, 2004
Messages
3,224
Front sheetmetal is finally attached to the engine cage. Still have a million small things to finish up, but it's coming together.

IMG_3547_zpsp0dlw69e.jpg


IMG_3552_zpsb9drofxj.jpg


IMG_3550_zpsb1el0map.jpg
 
OP
OP
JSmall

JSmall

Bronco Guru
Joined
Feb 18, 2004
Messages
3,224
Looks way better than mine did at that stage:cool:

Thanks Steve! I wouldn't be to this point if I didn't have help from you and a few others. I was going to call the other day to ask about the suspension on Frampton's Bronco. I might still do that ;)

Looks awesome Jaromy. What are your plans regarding lifts?

Appreciate it Mark! Are you talking about the suspension lift? If so, I plan to run about a 3 to 3.5" lift when I'm done. I'm sitting at full bump until I can finish up a few more things and then I will take it to Robert's shop to fill the struts with nitrogen. I will order my own fill station soon.
 
OP
OP
JSmall

JSmall

Bronco Guru
Joined
Feb 18, 2004
Messages
3,224
The steering geometry is looking good at ride height. The drag link and trac bar are almost the same length and the angles are within a degree of each other.

 
OP
OP
JSmall

JSmall

Bronco Guru
Joined
Feb 18, 2004
Messages
3,224
That's going to steer nice and straight:cool:

I sure hope so :D

Front driveline matches the rear now

6AA6BAB9-B7EC-4E65-91C4-37374FC1E854_zpsydq8eeqx.jpg


Tank is mocked up. Debating cutting the floor so I can move it a few inches higher.

2620D486-DBDE-49D9-BF03-569EF1D4D3C3_zpsfydbml6o.jpg


Good thing I don't have nice paint :eek:

EC461673-272E-49BE-ADB1-689A1456D303_zpsyavyts1x.jpg


He is filling all the holes with screw drivers ;D

17B1E2B3-A429-4BDA-B0C4-AA7B046538EE_zpsygvdrdhi.jpg
 
OP
OP
JSmall

JSmall

Bronco Guru
Joined
Feb 18, 2004
Messages
3,224
The pump bracket has been recessed into the tank 1.5 inches for more clearance.

A420CA08-E8C8-4BD2-AC04-651F1E0FEA89_zpsef7ixwos.jpg


EC083BFA-D05A-4C2C-84EA-1937B452BFFE_zpskgivmza1.jpg


Converted the hard line to AN fittings

2A52C55F-4124-4D31-AA4C-2B8B0689E6AF_zpsklcjcgtb.jpg
 
OP
OP
JSmall

JSmall

Bronco Guru
Joined
Feb 18, 2004
Messages
3,224
Thanks guys! My progress is slow lately, but it's still coming along
 

half cab

Contributor
Guru Bronco
Joined
Dec 8, 2010
Messages
16,311
I understand why some question what I did, but in the end, it's my vision and my money.

Right on and I also don't understand the peeps gettin the heebee geebees when someone wants to cut their own rig. It was the cut ones the put Broncos on the map back in the day.

The badd azz reputation that Broncos have to this day are rooted in what the cut n lifted big tired ones of the '70's n '80's did!

Just my two cent...carry on
 
Top