• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Thread sealant on accessory brackets

brianstrange

Bronco Guru
Joined
Nov 22, 2011
Messages
1,626
Just had an afterthought. I didn't use thread sealant on my accessory brackets, and if I remember correctly, one goes into the coolant passage in the head. Can anyone cofirm, and know which bolts need sealant? 5.0 Mustang E7 heads

Thanks!
 

Hozr

Bronco Guru
Joined
Oct 15, 2011
Messages
1,439
Loc.
Rogue Valley, OR
Are you talking about the thermactor holes? I don't remember anything in the heads penetrating to the water jacket but the big holes in the upper corner go to the exhaust for EGR and smog.

egrhead004.jpg
 

blubuckaroo

Grease Monkey
Joined
Jun 11, 2007
Messages
11,796
Loc.
Ridgefield WA
I'm not aware of a bolt that goes through to the coolant, but there is a Thermactor port at each end of the head that goes to the exhaust galley. Those ports are usually plugged with a 5/8-11 reducer that has a 7/16-14 female thread. That threaded adapter is often used to mount accessories.
Those plugs/adapters should have sealant on them before installation, but the bolt doesn't need sealant because the plugs have a bottom in them.
http://www.summitracing.com/parts/TFS-51400265/
 
OP
OP
B

brianstrange

Bronco Guru
Joined
Nov 22, 2011
Messages
1,626
I'm not aware of a bolt that goes through to the coolant, but there is a Thermactor port at each end of the head that goes to the exhaust galley. Those ports are usually plugged with a 5/8-11 reducer that has a 7/16-14 female thread. That threaded adapter is often used to mount accessories.
Those plugs/adapters should have sealant on them before installation, but the bolt doesn't need sealant because the plugs have a bottom in them.
http://www.summitracing.com/parts/TFS-51400265/

I have the inserts on the front, and the rear therm ports are blocked. So I'm hearing that none of the three accessory bracket bolts enter a coolant passage on the passengers side? If so, I guess I'm good. Thanks!
 
Top