Tie rod flip

[Got4wd]

How much lift and are you planning on raising the track bar at the axle end?

Todd Z.

Just 2.5. With 1.5 body for the coyote. WH drop track bar is already on there.

 

[DonaldDouchebag]

I just did a TRO with the 1-ton Chevy tie rod and drag link. I have a 2.5” lift and I went with the Wild Horses track bar riser mounted on the axle. I narrowed and rewelded the end of the track bar and bushing, got a super short castle nut, and cut the stud way down. Barely clears but it’s alright.

It is all very tight with a 2.5” lift but it can work. You can get a bit more clearance without a track bar riser.

Also installed Cage long arms. Drives fantastic and has very little bump steer.