Tintable bed liner

[Blue71]

Looking to buy some "Tintable" bed liner. Gonna go with a "medium gray" color most likely. What do you guys recommend that looks good, lays down nice, and comes as a mostly complete easy to use kit? Post some pics of gray if you guys have some.

Thanks,

Blue71

 

[Explorer]

UPOL Raptorliner

 

[Gerbow]

Explorer...Is the Raptorliner a rough, like non-skid or sand paper like, texture?
I am wanting to do the same grey color. Will it go over an existing liner?

 

[Explorer]

It's a smoother finish than the rest. Not non-skid. I don't believe it would do well over an existing liner. It is however, easy to reshoot if you ever need to.

 

[ZOSO]

You can also look up al's liner

 

[Sac '68 sport]

I did the self tint Raptor inside the tub of mine and the black on the bottom and inside the fenders. Both turned out really nice. There are some pics near the bottom of pg one of my build thread.
http://classicbroncos.com/forums/showthread.php?t=169069

I did spray Raptor over Raptor on some spots on the Tub I didn't get real well and it stuck fine, but I don't think I would spray anything over any other liner. The self tint seems to be a little softer than the black for a few months, or at least that was my experience. One of those big 6 inch or so 36 grit flapper wheels on the angle grinder should get that other liner right up.

 

[BronCowie]

I asked a similar question last month. Check this thread out for some good input on the subject.

http://classicbroncos.com/forums/showthread.php?t=197569&highlight=liner+comparo

 

[Blue71]

Great thread. Thanks for pointing me over that way.

Blue71

 

[72_EB]

SEM liner tinted '71 Cactus Green. I really like the stuff. I'd stick with a darker gray tint though as the light colors show dirt like crazy.
Line-X does a tinted liner now too, which might be a little tougher, but I like smoothness of the SEM. It doesn't hurt dragging knuckles across it.