KUBOTA OWNER
New Member
- Joined
- Jun 18, 2012
- Messages
- 49
I was wondering if any one would be able to help me with a new problem that seems to have come up. I have a 69 stock bronco with no mod's. I do not drive it everyday. I have notice a pull to the right and excessive outside
tread wear. -- Just by looking I can see that there is a lot of positive camber
on the right side. --- as much as 1/2 inch from top to bottom.
--jacked it up and can't find any play in the king pin or wheel bearing.
The "C" bushing are about shot, but still hold the axle tight. --- from looking at the suspension set up I can't see why i have so much +camber.
Do you think the "c" bushing would cause this? Or what should i look for?
---Thanks
tread wear. -- Just by looking I can see that there is a lot of positive camber
on the right side. --- as much as 1/2 inch from top to bottom.
--jacked it up and can't find any play in the king pin or wheel bearing.
The "C" bushing are about shot, but still hold the axle tight. --- from looking at the suspension set up I can't see why i have so much +camber.
Do you think the "c" bushing would cause this? Or what should i look for?
---Thanks











