• Just a reminder that you won't be able to start new posts or reply to existings posts in the Archive forum.

    This is where all the old posts go so they can still be used for reference and searched.
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Totally Stainless - Bolt Kits

Flash69

Bronco Guru
Joined
Jul 21, 2004
Messages
2,429
Loc.
Southwest Va
I used the complete body kit and the complete engine kit. There was a few things that it didnt cover but all in all i was pleased with it.
 

MnkyBiz

Bronco Guru
Joined
Jan 17, 2004
Messages
3,758
Loc.
Northern VA/DC
I purchased that kit.

Most of the small HW that you will use to reinstall your stock mouldings are not included (e.g. the screws that hold on your rear weather stripping, the chrome floor mouldings, miscellaneous bolts to the front of your block).

In all it is a 85% solution, and worth every penny! What my kit didn't have, Lowes & NAPA had no problem.

MnkyBiz
 

elemetal

Sr. Member
Joined
Jan 26, 2003
Messages
381
Loc.
Oakland, CA
Just be careful with the stainless. It has a lower tensile strength than what you're used to with bolts so its easier to cross thread, chew thread and strip head. Don't crank 'em into a dirty thread, clean it first.
 
OP
OP
P

PS

Full Member
Joined
Nov 11, 2003
Messages
325
Loc.
Sebastopol, CA
O.K., so Totally Stainless seems to be the way to go.

Upon assembly: use white Lithium Grease? Anti-Seize? Space age super-duper thread goo?

I don't think there's any real difference in price going directly to Totally Stainless instead of through one of the vendors (JBG).
 
Top