1970njbronc
New Member
I finally replaced the entire suspension and then I went to put the tracking bar back on and I can't get it to lineup. It is about 1" to far to the left of the frame bracket.
Should I have installed the tracking bar prior to tightening all the C and radius arm bushings?
Should I loosen all bushings, support the frame with stands and try to force it over into the bracket or should I just get an extra set of hands and try to pull the entire front end over???
Every time I take 2 steps forward, I always take 1 back.
Any suggestions are greatly appreciatted...
Thanks..
:-[
Should I have installed the tracking bar prior to tightening all the C and radius arm bushings?
Should I loosen all bushings, support the frame with stands and try to force it over into the bracket or should I just get an extra set of hands and try to pull the entire front end over???
Every time I take 2 steps forward, I always take 1 back.
Any suggestions are greatly appreciatted...
Thanks..
:-[