• Just a reminder that you won't be able to start new posts or reply to existings posts in the Archive forum.

    This is where all the old posts go so they can still be used for reference and searched.
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Trail carnage/damage!!

matt w

Bronco Guru
Joined
Jun 12, 2007
Messages
2,799
Well after YEARS of wheeling I finally did some trail damage...TREE WON!

See Pics....

All I need is the small corner section of trim.(YOU KNOW THE PART THAT LOOKS LIKE TIN FOIL!!;D) All I can find is "full lengths".

Does anyone know where I can get the small corner section only!
 

Attachments

  • TRAIL DAMAGE 1.jpg
    TRAIL DAMAGE 1.jpg
    75.4 KB · Views: 278
  • TRAIL DAMAGE 2.jpg
    TRAIL DAMAGE 2.jpg
    64.1 KB · Views: 241
  • TRAIL DAMAGE 3.jpg
    TRAIL DAMAGE 3.jpg
    92.5 KB · Views: 251

Kyle.malone

Bronco Guru
Joined
Mar 9, 2006
Messages
3,077
Loc.
Norman, OK
Don't know where to get the trim piece.. You could just install some BC 1/4 guards and tree huggers and gain some protection at the same time your carnage will be covered up.
 
OP
OP
matt w

matt w

Bronco Guru
Joined
Jun 12, 2007
Messages
2,799
Don't know where to get the trim piece.. You could just install some BC 1/4 guards and tree huggers and gain some protection at the same time your carnage will be covered up.

Well I thought of that BUT I have some good paint left over and the new part is oabbout 96.00 with tax and shipping...I don't think i will be doing THIS again!:eek:%);D
 
OP
OP
matt w

matt w

Bronco Guru
Joined
Jun 12, 2007
Messages
2,799
Good job Matt. Now you can have fun and relax at the same time, now that the damage has been done. Maybe some of these will cover up and protect from those aggressive trees.

http://www.bcbroncos.com/store/product_info.php?cPath=34_42&products_id=452

....I already ordered a replacement section..96.00 I think and I have some paint that match well as I used it for the flares and I can't even tell they were painted after the fact...I'm just gonna throw a new corner on and watch out for puddles of water in holes hiding in the shade of abscure lines on small rock step ups!..water and rocks don;t work well at times! ;D then throw in a tree ya went around to take a cool line and then back up after the water...oh well!;D

PS Im SUPER GLAD of this old metal! Tuff stuff for sure! I hope the new is as thick!
 

sprdv1

Contributor
REBEL
Joined
Mar 8, 2007
Messages
81,996
Well crap.. bound to happen eventually right.. glad it weren't worst.. ;)
 

mtfit

Bronco Guru
Joined
Jun 29, 2004
Messages
1,012
Loc.
pa
you wheel alot and thats it? wow, body damage is common for me.
 

gravy

Bronco Guru
Joined
Sep 4, 2006
Messages
1,236
Loc.
Parsippany
bc corners are the way to go if you are wheeling- I had similar damage before adding the corners years ago- as mtfit said it is a regular occurance. I keep extra fenders lol.
 

Rustytruck

Bronco Guru
Joined
Feb 24, 2002
Messages
10,872
Your better off fixing that dent than repalcing the corner. the factory corners are so much better than the replacements.
 

Bronco Junkie

So Cal Broncos
Joined
Feb 29, 2012
Messages
3,246
And Bondo it?....Nope

If Bondo is used correctly...it is great. A good body guy could pound out that dent and then use only a very thin coating of Bondo to make it perfect. You would never know. Most the super cherry restored cars you see....have Bondo on them to make them perfect.
 
OP
OP
matt w

matt w

Bronco Guru
Joined
Jun 12, 2007
Messages
2,799
If Bondo is used correctly...it is great. A good body guy could pound out that dent and then use only a very thin coating of Bondo to make it perfect. You would never know. Most the super cherry restored cars you see....have Bondo on them to make them perfect.

Hmmm... You guys might have a point. I have a good friend that does this stuff for a living & had an EB until a year ago or so. I will run it by him to get his opinion. I was going to just show up with the replacement part. I'll talk to him 1st, thanks guys!!! That's why I like this sight!!
 

rcmbronc

Contributor
Bronco Guru
Joined
Dec 15, 2003
Messages
2,778
Loc.
Tomah WI
I would also recommend getting it fixed instead of replacement. If replacement I would just cut in the piece needed not the total corner.
 

jw0747

Bronco Guru
Joined
Nov 22, 2006
Messages
2,434
Loc.
San Antonio, TX
any vehicle that's had a dent fixed by a professional body shop in the last 40 years had some bondo applied where the dent was.
 

Bronco Junkie

So Cal Broncos
Joined
Feb 29, 2012
Messages
3,246
any vehicle that's had a dent fixed by a professional body shop in the last 40 years had some bondo applied where the dent was.

Yes, but you need maximum metal working before Bondo is used. If Bondo is used to just fill and repair.....BAD!!! Bondo should only be used as a thin coating for final perfection.
 

Bajabrewer

Contributor
Bronco Guru
Joined
Jan 28, 2012
Messages
1,674
Yes, but you need maximum metal working before Bondo is used. If Bondo is used to just fill and repair.....BAD!!! Bondo should only be used as a thin coating for final perfection.

reminds me of a Cadillac that came in to the shop I was working at for an estimate. It had concrete filling the rust holes in the lower quarters & I was really glad when the boss refused to even work on that POS. :p
 

patterdale

Bronco Guru
Joined
May 24, 2010
Messages
1,252
Heck watch any cable tv show on car restoration. If bondomwas was a bad thing Chip Foos wouldn't be in business or near as popular as he is. If you know a real old school body guy that could lead it you'd be in. That's how they did it at the St. Paul assembly plant for years.
 
Top